04 Fakultät Energie-, Verfahrens- und Biotechnik
Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/5
Browse
11 results
Search Results
Item Open Access Acid catalyzed cross‐linking of polyvinyl alcohol for humidifier membranes(2021) Michele, Andre; Paschkowski, Patrick; Hänel, Christopher; Tovar, Günter E. M.; Schiestel, Thomas; Southan, AlexanderPolyvinyl alcohol (PVA) is a hydrophilic polymer well known for good film forming properties, high water vapor permeance JW, and low nitrogen permeance. However, depending on molar mass and temperature, PVA swells strongly in water until complete dissolution. This behavior affects the usability of PVA in aqueous environments and makes cross‐linking necessary if higher structural integrity is envisaged. In this work, PVA networks are formed by thermal cross‐linking in the presence of p‐toluenesulfonic acid (TSA) and investigated in a design of experiments approach. Experimental parameters are the cross‐linking period tc, temperature ϑ and the TSA mass fraction wTSA. Cross‐linking is found to proceed via ether bond formation at all reaction conditions. Degradation is promoted especially by a combination of high wTSA, tc and ϑ. Thermal stability of the networks after preparation is strongly improved by neutralizing residual TSA. Humidification membranes with a JW of 6423 ± 63.0 gas permeation units (GPU) are fabricated by coating PVA on polyvinyliden fluoride hollow fibers and cross‐linking with TSA. Summarizing, the present study contributes to a clearer insight into the cross‐linking of PVA in presence of TSA, the thermal stability of the resulting networks and the applicability as selective membrane layers for water vapor transfer.Item Open Access Integrated process design and optimisation for the production of cellobiose lipids from Ustilago sp.(2024) Oraby, Amira; Rupp, Steffen (Prof. Dr.)Item Open Access Unravelling parameter interactions in calcium alginate/polyacrylamide double network hydrogels using a design of experiments approach for the optimization of mechanical properties(2024) Gorke, Oliver; Stuhlmüller, Marc; Tovar, Günter E. M.; Southan, AlexanderCalcium alginate/polyacrylamide double network hydrogels were reported to be exceptionally tough. However, literature reports so far varied the sample compositions mainly by one parameter at a time approaches, thus only drawing an incomplete picture of achievable material properties. In this contribution, sample compositions are varied according to a face-centered central composite experimental design taking into account the four parameters of alginate concentration cAlg, high/low molar mass alginate mixing ratio RP, acrylamide concentration cAAm, and N,N′-methylenebisacrylamide concentration cMBA. Each sample composition is investigated in triplicate. Thus, 75 samples were investigated by tensile testing, and a detailed analysis of the significant parameters and parameter interactions influencing the mechanical properties is conducted. The data shows that two parameter interactions, involving all four tested parameters, have a large effect on the Young's modulus, the strength, the toughness and the strain at material failure. As a consequence, it becomes evident that the experimental procedure from previous studies did not always result in optimum sample compositions. The results allow optimization of the mechanical properties within the studied parameter space, and a new maximum value of the strength of 710 kPa is reported. The data also give rise to the assumption that other parameters and parameter interactions ignored also in this study may allow further tailoring of mechanical properties.Item Open Access Monodopsis subterranea is a source of α‐tocomonoenol, and its concentration, in contrast to α‐tocopherol, is not affected by nitrogen depletion(2023) Montoya‐Arroyo, Alexander; Muñoz‐González, Alejandra; Lehnert, Katja; Frick, Konstantin; Schmid‐Staiger, Ulrike; Vetter, Walter; Frank, Janα‐Tomonoenols (αT1) are tocochromanols structurally related to tocopherols (T) and tocotrienols (T3), the bioactive members of the vitamin E family. However, limited evidence exists regarding the sources and biosynthesis of tocomonoenols. Nitrogen depletion increases the content of α‐tocopherol (αT), the main vitamin E congener, in microalgae, but little is known regarding its effect on other tocochromanols, such as tocomonoenols and tocotrienols. We therefore quantified the concentrations of T, T1, and T3, in freeze‐dried biomass from nitrogen‐sufficient, and nitrogen‐depleted Monodopsis subterranea (Eustigmatophyceae). The identities of isomers of αT1 were confirmed by LC-MS and GC-MS. αT was the predominant tocochromanol (82% of total tocochromanols). αT1 was present in higher quantities than the sum of all T3 (6% vs. 1% of total tocochromanols). 11′‐αT1 was the main αT1 isomer. Nitrogen depletion increased αT, but not αT1 or T3 in M. subterranea. In conclusion, nitrogen depletion increased the content of αT, the biologically most active form of vitamin E, in M. subterranea without affecting αT1 and T3 and could potentially be used as a strategy to enhance its nutritional value but not to increase αT1 content, indicating that αT1 accumulation is independent of that of αT in microalgae.Item Open Access Beta-glucan production of Phaeodactylum tricornutum, Monodopsis subterranea and Cylindrotheca fusiformis during nitrogen depletion(2023) Frick, Konstantin; Ebbing, Tobias; Yeh, Yen-Cheng; Schmid-Staiger, Ulrike; Tovar, Günter E. M.AbstractBeta-glucans are polysaccharides that can be used for different applications, for example as an immunomodulator in food or feed or for managing high cholesterol levels. Certain microalgae species use beta-glucans as energy storage, accumulating them during nutrient depletion. In this study, we examined and compared beta-glucan production during nitrogen depletion in three different algae species, Phaeodactylum tricornutum, Monodopsis subterranea and Cylindrotheca fusiformis, grown in artificially illuminated flat panel airlift reactors, in order to determine the most promising microalgae species for beta-glucan production. Co-products such as fatty acids (especially eicosapentaenoic acid) and the carotenoid fucoxanthin (not produced by M. subterranea) were also considered. Biomass analysis showed that P. tricornutum cultures reached a maximal beta-glucan content of 317 ± 9 mg gDW-1, M. subterranea cultures reached 188 ± 6 mg gDW-1 and C. fusiformis cultures reached 129 ± 13 mg gDW-1. Furthermore, beta-glucan production was faster in P. tricornutum cultures. However, the maximum volumetric beta-glucan concentration reached was higher in M. subterranea cultures compared to P. tricornutum cultures as M. subterranea cultures produced more biomass during nitrogen depletion. In terms of possible co-products, P. tricornutum produced fucoxanthin and EPA, whereas M. subterranea did not produce fucoxanthin. However, M. subterranea exhibited a higher EPA content, which remained above 45 mg g-1 even after several days of nitrogen depletion. Overall, our results suggest that P. tricornutum and M. subterranea are both suitable species for beta-glucan production in flat panel airlift reactors.Item Open Access Soft sub‐structured multi‐material biosensor hydrogels with enzymes retained by plant viral scaffolds(2023) Grübel, Jana; Wendlandt, Tim; Urban, Daniela; Jauch, Corinna O.; Wege, Christina; Tovar, Günter E. M.; Southan, AlexanderAn all‐soft multi‐material combination consisting of a hydrogel based on poly(ethylene glycol) (PEG) coated with spatially defined spots of gelatin methacryloyl (GM) containing selectively addressable viral nanorods is presented, and its basic application as a qualitative biosensor with reporter enzymes displayed on the tobacco mosaic virus (TMV) bioscaffolds within the GM is demonstrated. Biologically inert PEG supports are equipped with GM spots serving as biological matrix for enzymes clustered on TMV particles preventing diffusion out of the gel. For this multi‐material combination, i) the PEG‐based hydrogel surface is modified to achieve a clear boundary between coated and non‐coated regions by introducing either isothiouronium or thiol groups. ii) Cross‐linking of the GM spots is studied to achieve anchoring to the hydrogel surface. iii) The enzymes horseradish peroxidase or penicillinase (Pen) are conjugated to TMV and integrated into the GM matrix. In contrast to free enzymes, enzyme‐decorated TMVs persist in GM spots and show sustained enzyme activity as evidenced by specific color reaction after 7 days of washing, and for Pen after 22 months after dry storage. Therefore, the integration of enzyme‐coupled TMV into hydrogel matrices is a promising and versatile approach to obtaining reusable and analyte‐specific sensor components.Item Open Access Adsorption on inkjet-printable polyelectrolyte hydrogels allows refractive index sensing of diclofenac and metoprolol in aqueous solution(2024) Southan, Alexander; Tan, Jennifer; Schuster, Fabian; Rotenberger, Julia; Tovar, Günter E. M.Polyelectrolyte hydrogels containing negatively charged sulfonate groups or positively charged ammonium groups are characterized by their adsorption behavior toward the pharmaceuticals metoprolol (cationic) and diclofenac (anionic) in an aqueous solution. Additionally, the change in the hydrogel refractive index with metoprolol and diclofenac concentrations inside the hydrogel is investigated. Both metoprolol adsorption on sulfonate group containing hydrogels as well as diclofenac adsorption on the ammonium group containing hydrogels can be described using a modified Langmuir-type adsorption isotherm with Ks values around 0.1 and 10 mL μmol-1, respectively. In both cases, the adsorption capacities are close to the concentration of charged groups in the hydrogels. Thus, diclofenac concentrations inside the hydrogels are enhanced by a factor of approximately 1000 and metoprolol concentrations by a factor of approximately 10 compared to their concentrations in solution. In contrast, metoprolol was completely excluded from the ammonium group containing hydrogels, and diclofenac showed weak adsorption on the poly(ethylene glycol) fraction of the sulfonate group containing hydrogels, resulting in lower concentration enhancements. Hydrogel refractive indices increased linearly with the concentration of metoprolol and diclofenac inside the hydrogels. Thus, monitoring the refractive index of sulfonate group containing hydrogels is shown to be efficient in measuring the solution concentrations of metoprolol up to 10 μmol mL-1 and of ammonium group containing hydrogels for diclofenac concentrations up to 0.1 μmol mL-1, both values corresponding to the reciprocal of the Ks values. In the case of Langmuir-type adsorption, maximizing Ks values therefore leads to the best refractive index sensor sensitivities at low analyte concentrations, whereas lower Ks values lead to lower sensitivities at low concentrations but to superior sensitivities at rather high analyte concentrations. Inkjet printing of the hydrogel formulations is demonstrated to facilitate their future use as spatially resolved coatings on sensor surfaces.Item Open Access Influence of hard segment content and diisocyanate structure on the transparency and mechanical properties of poly(dimethylsiloxane)-based urea elastomers for biomedical applications(2021) Riehle, Natascha; Athanasopulu, Kiriaki; Kutuzova, Larysa; Götz, Tobias; Kandelbauer, Andreas; Tovar, Günter; Lorenz, GünterItem Open Access Past, present and future of glycolipids from Ustilaginaceae : a review on cellobiose lipids and mannosylerythritol lipids(2024) Münßinger, Sini; Beck, Alexander; Oraby, Amira; Zibek, SusanneThe glycolipids cellobiose lipids (CL) and mannosylerythritol lipids (MEL) are biosurfactants mainly synthesized by microorganisms of the Ustilaginaceae family. They have a large structural diversity, varying in their sugar moieties and the attached fatty acids, resulting in a prospectively broad range of applications. This literature review provides a detailed overview of known microbial producers of CL and MEL, and their respective metabolic pathways that result in different molecular structures. Further, current advances in the aerobic fermentative synthesis of the glycolipids and their purification methods are illustrated. All influencing factors identified to date with regard to the fermentation are highlighted in detail: For CL synthesis usually hydrophilic carbon sources are used as substrate, whereas hydrophobic carbon sources are usually metabolized to MEL. Nitrogen limitation was described as a major trigger for glycolipid synthesis and an acidic pH range was favored for increased CL production. An overview of applied fermentation parameters in recent publications (e.g., substrate‐concentrations, feeding approaches) demonstrates the future potential of CL and MEL production optimization. Foaming during fermentation is either combated or exploited by foam fractionation as the first purification step. The current purification processes focus on solvent extractions and chromatography in the laboratory scale and a need for development was identified for future scale‐up. Finally, environmental hotspots during CL and MEL production are presented and future optimization potentials are highlighted.Item Open Access Comprehensive characterization and evaluation of the process chain and products from Euphausia superba exocuticles to chitosan(2023) Hahn, Thomas; Egger, Jeannine; Krake, Simon; Dyballa, Michael; Stegbauer, Linus; Seggern, Nils von; Bruheim, Inge; Zibek, SusanneAntarctic krill (Euphausia superba) is a source for compounds of high nutritive value. Within that process of extraction, exocuticles (shells) accumulate which are currently disposed. A valorization of the compounds of the exocuticle such as chitosan would be beneficial to avoid waste and to obtain a versatile polymer at the same time. In contrast to previous investigations focusing on chitosan production from whole krill, we applied and optimized process stages of the chitosan production from the exocuticles, performing a comprehensive analytical evaluation of the whole process, the side streams and the products for the first time. Degreasing was the first step resulting in a krill oil yield of 6.2% using ethanol. The fatty acid profile exhibited high contents of phospholipids (21.2%). Citric acid offered a demineralization efficiency of 93%. Deproteinization investigation revealed 2 M NaOH and 90°C for 2.5 h to be the best parameters, resulting in a deproteinization efficiency of 99.9% and a chitin content of 92.8%. The spectroscopic investigation indicated that the chitin has a crystallinity index of 76% and an acetylation degree of 88%. The deacetylation degrees of the resulting chitosans is determined to be 74%-88%, the molecular weight ranges from 102 to 126 kDa.