04 Fakultät Energie-, Verfahrens- und Biotechnik
Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/5
Browse
58 results
Search Results
Item Open Access Nano-in-micro-particles consisting of PLGA nanoparticles embedded in chitosan microparticles via spray-drying enhances their uptake in the olfactory mucosa(2021) Spindler, Lena Marie; Feuerhake, Andreas; Ladel, Simone; Günday, Cemre; Flamm, Johannes; Günday-Türeli, Nazende; Türeli, Emre; Tovar, Günter E. M.; Schindowski, Katharina; Gruber-Traub, CarmenIntranasal delivery has gained prominence since 1990, when the olfactory mucosa was recognized as the window to the brain and the central nervous system (CNS); this has enabled the direct site specific targeting of neurological diseases for the first time. Intranasal delivery is a promising route because general limitations, such as the blood-brain barrier (BBB) are circumvented. In the treatment of multiple sclerosis (MS) or Alzheimer’s disease, for example, future treatment prospects include specialized particles as delivery vehicles. Poly(lactic-co-glycolic acid) (PLGA) nanoparticles are well known as promising delivery systems, especially in the area of nose-to-brain (N2B) delivery. Chitosan is also broadly known as a functional additive due to its ability to open tight junctions. In this study, we produced PLGA nanoparticles of different sizes and revealed for the first time their size-time-dependent uptake mechanism into the lamina propria of porcine olfactory mucosa. The intracellular uptake was observed for 80 and 175 nm within only 5 min after application to the epithelium. After 15 min, even 520 nm particles were detected, associated with nuclei. Especially the presence of only 520 nm particles in neuronal fibers is remarkable, implying transcellular and intracellular transport via the olfactory or the trigeminal nerve to the brain and the CNS. Additionally, we developed successfully specialized Nano-in-Micro particles (NiMPs) for the first time via spray drying, consisting of PLGA nanoparticles embedded into chitosan microparticles, characterized by high encapsulation efficiencies up to 51%, reproducible and uniform size distribution, as well as smooth surface. Application of NiMPs accelerated the uptake compared to purely applied PLGA nanoparticles. NiMPs were spread over the whole transverse section of the olfactory mucosa within 15 min. Faster uptake is attributed to additional paracellular transport, which was examined via tight-junction-opening. Furthermore, a separate chitosan penetration gradient of ∼150 µm caused by dissociation from PLGA nanoparticles was observed within 15 min in the lamina propria, which was demonstrated to be proportional to an immunoreactivity gradient of CD14. Due to the beneficial properties of the utilized chitosan-derivative, regarding molecular weight (150-300 kDa), degree of deacetylation (80%), and particle size (0.1-10 µm) we concluded that M2-macrophages herein initiated an anti-inflammatory reaction, which seems to already take place within 15 min following chitosan particle application. In conclusion, we demonstrated the possibility for PLGA nanoparticles, as well as for chitosan NiMPs, to take all three prominent intranasal delivery pathways to the brain and the CNS; namely transcellular, intracellular via neuronal cells, and paracellular transport.Item Open Access Acid catalyzed cross‐linking of polyvinyl alcohol for humidifier membranes(2021) Michele, Andre; Paschkowski, Patrick; Hänel, Christopher; Tovar, Günter E. M.; Schiestel, Thomas; Southan, AlexanderPolyvinyl alcohol (PVA) is a hydrophilic polymer well known for good film forming properties, high water vapor permeance JW, and low nitrogen permeance. However, depending on molar mass and temperature, PVA swells strongly in water until complete dissolution. This behavior affects the usability of PVA in aqueous environments and makes cross‐linking necessary if higher structural integrity is envisaged. In this work, PVA networks are formed by thermal cross‐linking in the presence of p‐toluenesulfonic acid (TSA) and investigated in a design of experiments approach. Experimental parameters are the cross‐linking period tc, temperature ϑ and the TSA mass fraction wTSA. Cross‐linking is found to proceed via ether bond formation at all reaction conditions. Degradation is promoted especially by a combination of high wTSA, tc and ϑ. Thermal stability of the networks after preparation is strongly improved by neutralizing residual TSA. Humidification membranes with a JW of 6423 ± 63.0 gas permeation units (GPU) are fabricated by coating PVA on polyvinyliden fluoride hollow fibers and cross‐linking with TSA. Summarizing, the present study contributes to a clearer insight into the cross‐linking of PVA in presence of TSA, the thermal stability of the resulting networks and the applicability as selective membrane layers for water vapor transfer.Item Open Access Integrated process design and optimisation for the production of cellobiose lipids from Ustilago sp.(2024) Oraby, Amira; Rupp, Steffen (Prof. Dr.)Item Open Access Unravelling parameter interactions in calcium alginate/polyacrylamide double network hydrogels using a design of experiments approach for the optimization of mechanical properties(2024) Gorke, Oliver; Stuhlmüller, Marc; Tovar, Günter E. M.; Southan, AlexanderCalcium alginate/polyacrylamide double network hydrogels were reported to be exceptionally tough. However, literature reports so far varied the sample compositions mainly by one parameter at a time approaches, thus only drawing an incomplete picture of achievable material properties. In this contribution, sample compositions are varied according to a face-centered central composite experimental design taking into account the four parameters of alginate concentration cAlg, high/low molar mass alginate mixing ratio RP, acrylamide concentration cAAm, and N,N′-methylenebisacrylamide concentration cMBA. Each sample composition is investigated in triplicate. Thus, 75 samples were investigated by tensile testing, and a detailed analysis of the significant parameters and parameter interactions influencing the mechanical properties is conducted. The data shows that two parameter interactions, involving all four tested parameters, have a large effect on the Young's modulus, the strength, the toughness and the strain at material failure. As a consequence, it becomes evident that the experimental procedure from previous studies did not always result in optimum sample compositions. The results allow optimization of the mechanical properties within the studied parameter space, and a new maximum value of the strength of 710 kPa is reported. The data also give rise to the assumption that other parameters and parameter interactions ignored also in this study may allow further tailoring of mechanical properties.Item Open Access The microalgae phaeodactylum tricornutum Is well suited as a food with positive effects on the intestinal microbiota and the generation of SCFA : results from a pre-clinical study(2022) Stiefvatter, Lena; Neumann, Ulrike; Rings, Andreas; Frick, Konstantin; Schmid-Staiger, Ulrike; Bischoff, Stephan C.Microalgae such as Phaeodactylum tricornutum (PT) are a sustainable source of nutrients, especially eicosapentaenoic acid (EPA), fucoxanthin (Fx), and chrysolaminarin (Chrl), the concentrations of which can vary depending on the culture conditions. We generated three types of diets containing either an EPA- and Fx-rich (EPA/Fx) or Chrl-rich microalgae (with 5, 15, or 25% added to the diet) or an isocaloric control diet (CD). These diets were evaluated over 14 days in young C57BL/6J mice for safety and bioavailability, short-chain fatty acid (SCFA) production, and microbiome analysis. Both microalgae diets increased body weight gain dose-dependently compared to the CD. Microalgae-derived EPA was well absorbed, resulting in increased liver and fat tissue levels and a decrease in the n-6:n-3 ratio in liver tissue. Both microalgae diets increased the production of selected SCFA and decreased the Firmicutes/Bacteriodota ratio, whereas the Chrl-rich diet led to an increase in Akkermansia. Doses of up to 4621 mg Chrl, 920 mg EPA, and 231 mg Fx per kg body weight daily were tolerated without adverse effects. This pre-clinical study shows that PT is suitable for mouse feed, with positive effects on microbiota composition and SCFA production, suggesting beneficial effects on gut health.Item Open Access Influence of light conditions on the production of chrysolaminarin using Phaeodactylum tricornutum in artificially illuminated photobioreactors(2023) Frick, Konstantin; Ebbing, Tobias; Yeh, Yen‐Cheng; Schmid‐Staiger, Ulrike; Tovar, Günter E. M.The light conditions are of utmost importance in any microalgae production process especially involving artificial illumination. This also applies to a chrysolaminarin (soluble 1,3-β-glucan) production process using the diatom Phaeodactylum tricornutum. Here we examine the influence of the amount of light per gram biomass (specific light availability) and the influence of two different biomass densities (at the same amount of light per gram biomass) on the accumulation of the storage product chrysolaminarin during nitrogen depletion in artificially illuminated flat-panel airlift photobioreactors. Besides chrysolaminarin, other compounds (fucoxanthin, fatty acids used for energy storage [C16 fatty acids], and eicosapentaenoic acid) are regarded as well. Our results show that the time course of C-allocation between chrysolaminarin and fatty acids, serving as storage compounds, is influenced by specific light availability and cell concentration. Furthermore, our findings demonstrate that with increasing specific light availability, the maximal chrysolaminarin content increases. However, this effect is limited. Beyond a certain specific light availability (here: 5 µmolphotons gDW-1 s-1) the maximal chrysolaminarin content no longer increases, but the rate of increase becomes faster. Furthermore, the conversion of light to chrysolaminarin is best at the beginning of nitrogen depletion. Additionally, our results show that a high biomass concentration has a negative effect on the maximal chrysolaminarin content, most likely due to the occurring self-shading effects.Item Open Access Simulation of Electron Bernstein Waves in FLiPS with various numerical methods(2021) Rumiantsev, Kirill; Hirth, Thomas (Prof. Dr.)The plasma generation and heating by microwaves is an important research topic in the field of controlled nuclear fusion. All modern fusion plasma devices such as Wendelstein 7-X use microwave heating. The microwave plasma-heating primarily occurs at the resonances, where the microwaves are efficiently absorbed. The heating scenario must be designed such that the microwaves can reach the resonance. When the plasma exceeds the cutoff density, the microwaves will be reflected, and the resonance becomes inaccessible. However, it is possible to perform heating by Electron Bernstein Waves (EBWs), since these electrostatic waves propagate even in overdense plasmas, unlike the electromagnetic plasma waves. EBWs cannot propagate in the vacuum and must be created through a coupling process. Both O- and X-mode can couple to EBWs. The thesis investigates the coupling of the O- and X-mode to EBWs as well as the EBW propagation with various numerical methods. The application of only one numerical method is not sufficient as the coupling involves very different wavelength scales. The optimal coupling scheme for the expected plasma parameters was determined using a Finite-Difference Time-Domain (FDTD) code. Since EBWs are not included in the code, a Boundary-Value Problem (BVP) code was developed. Using the BVP code, the effect of the collisions on EBWs was studied. The field amplification at the upper-hybrid resonance (UHR), where EBWs couple to the electromagnetic waves, and the effect of the magnetic field on EBWs could be directly visualized. The propagation of the EBW was investigated using the novel ray-tracing code RiP. The ray-tracing simulations provided a clear picture of the essential features of the wave propagation. For the O- and X-mode coupling, the importance of the axial plasma inhomogeneity was shown. For the first time, the method of the Wigner function was applied to calculate the intensity distribution of EBWs. Both, ray-tracing and the Wigner function simulations showed that the inhomogeneous magnetic can cause focusing of EBWs. The focusing effect can have practical applications e.g. for controlled local heating of the plasma. Additionally, the focusing effect can cause a parametric decay due to the field enhancement in the focal regions. In this thesis, the simulations were focused on excitation and propagation of EBWs in the geometry of the linear plasma device FLiPS located at the University of Stuttgart. Measurements were carried out to study the predicted focusing of the EBWs in the FLiPS plasma with monopole antennas. The measurements provided the density profile used in the simulations. The expected amplification of the signal at the UHR was not detected, indicating either the complete collisional absorption of the X-mode at the upper-hybrid resonance, or the turbulent plasma density oscillations that reduce the coupling efficiency to EBWs. These effects can be studied further using the developed tools since they provide a complete toolbox to study the full coupling process to EBWs in an actual experimental geometry.Item Open Access Monodopsis subterranea is a source of α‐tocomonoenol, and its concentration, in contrast to α‐tocopherol, is not affected by nitrogen depletion(2023) Montoya‐Arroyo, Alexander; Muñoz‐González, Alejandra; Lehnert, Katja; Frick, Konstantin; Schmid‐Staiger, Ulrike; Vetter, Walter; Frank, Janα‐Tomonoenols (αT1) are tocochromanols structurally related to tocopherols (T) and tocotrienols (T3), the bioactive members of the vitamin E family. However, limited evidence exists regarding the sources and biosynthesis of tocomonoenols. Nitrogen depletion increases the content of α‐tocopherol (αT), the main vitamin E congener, in microalgae, but little is known regarding its effect on other tocochromanols, such as tocomonoenols and tocotrienols. We therefore quantified the concentrations of T, T1, and T3, in freeze‐dried biomass from nitrogen‐sufficient, and nitrogen‐depleted Monodopsis subterranea (Eustigmatophyceae). The identities of isomers of αT1 were confirmed by LC-MS and GC-MS. αT was the predominant tocochromanol (82% of total tocochromanols). αT1 was present in higher quantities than the sum of all T3 (6% vs. 1% of total tocochromanols). 11′‐αT1 was the main αT1 isomer. Nitrogen depletion increased αT, but not αT1 or T3 in M. subterranea. In conclusion, nitrogen depletion increased the content of αT, the biologically most active form of vitamin E, in M. subterranea without affecting αT1 and T3 and could potentially be used as a strategy to enhance its nutritional value but not to increase αT1 content, indicating that αT1 accumulation is independent of that of αT in microalgae.Item Open Access Vernetzung, Permeabilität, Wasser- und Hitzebeständigkeit Polyvinylalkohol-basierter Beschichtungen(2023) Michele, Andre; Tovar, Günter E. M. (Prof. Dr.)Polyvinylalkohol (PVA) ist ein hydrophiles Polymer mit vielfältigen Anwendungsmöglichkeiten. Ein Schwerpunkt liegt auf der Nutzung von PVA als Beschichtungsmaterial. Die Beständigkeit von PVA-Schichten in Wasser ist jedoch gering, da das Polymer unter Ausdehnung des Volumens quillt oder sich vollständig auflöst. Um die Wasserbeständigkeit zu erhöhen, wird PVA deshalb üblicherweise vernetzt. Hierfür sind zahlreiche Methoden bekannt. In der Regel besitzen diese jedoch entscheidende Nachteile. Daher besteht erheblicher Forschungsbedarf, um neue Vernetzungsmethoden für PVA-Schichten zu entwickeln und bestehende Methoden zu optimieren. In dieser Arbeit wurden zwei neue Vernetzungsmethoden für PVA entwickelt. Die erste basiert auf einer Weiterentwicklung der thermischen Vernetzung von PVA, in Anwesenheit starker Säuren. Mit dem Ziel Nebenreaktionen zu minimieren, wurde hierfür p-Toluolsulfonsäure (TSA) als neuer Vernetzer untersucht. Die zweite Methode basiert auf der UV-Licht-initiierten C,H-Insertion. Hierfür wurden zwei neue Polymere, mittels polymeranaloger Umsetzung von PVA mit 4-Fluorbenzophenon und PVA mit 4-Fluorbenzphenon und 1,3-Propansulfon, synthetisiert. Die auf diese Weise erhaltenen Benzophenon-Modifizierten PVA (PVA-BP) und sulfonierten PVA-BP (sPVA-BP), wurden bezüglich ihrer UV-Licht-initiierten Vernetzung untersucht. Für die Entwicklung der thermischen Vernetzung von PVA in Anwesenheit von TSA wurde ein statistischer Versuchsplan mit den experimentellen Parametern Temperatur (ϑ), Vernetzungsdauer (tc) und Massenkonzentration an TSA (wTSA) angewandt. Mit den Ergebnissen konnten statistische Modelle des Vernetzungsprozesses erstellt werden. Bei allen angewandten Parametern wurde die Ausbildung eines unlöslichen Materials und eine Schwarzfärbung beobachtet. Diese Beobachtungen konnten, durch die parallel ablaufende Vernetzung des PVA und Zersetzung durch Dehydratation und Oxidation, erklärt werden. Die Auswertung der aufgestellten Modelle ermöglichte die Identifizierung optimaler Vernetzungsparameter bei minimaler Zersetzung des Polymers. Die Entwicklung von Synthesevorschriften für PVA-BP und sPVA-BP war erfolgreich. Durch die Bestrahlung von PVA-BP- und sPVA-BP-Schichten mit UV-Licht wurden diese vernetzt und kovalent an das Substrat angebunden. Zur Untersuchung der Vernetzungsreaktion wurde ein Modell basierend auf der Perkolationstheorie angewandt. Eine Korrelation zwischen dem Benzophenon-Modifikationsgrad und der Vernetzungsgeschwindigkeit konnte hierdurch festgestellt werden. Dieser Effekt wurde über die größere Anzahl an potenziell reaktiven Gruppen für die C,H-Insertion erklärt. Der Gleichgewichtsquellgrad (EDS) verringerte sich mit fortschreitender Bestrahlungsdauer. Dies konnte mit der Verringerung der Maschenweite des Netzwerkes erklärt werden. Zudem sank der EDS mit steigendem Benzophenon-Modifikationsgrad und sinkendem Sulfonsäure-Modifikationsgrad. Als Erklärung hierfür werden die verringerte Hydrophilie und der geringere osmotischen Druck im Netzwerk, durch die geringere Anzahl an geladenen Sulfonsäure-Gruppen, angeführt. Anwendung fanden die in dieser Arbeit vorgestellten Vernetzungsmethoden bei der Herstellung von wasser- und hitzebeständigen Komposit-Membranen mit semipermeablen PVA-Schichten. Die Membranen waren dicht gegenüber Stickstoff, jedoch gut permeabel für Wasserdampf. Folglich konnte gezeigt werden, dass die vorgestellten Vernetzungsmethoden generell für die Herstellung von Membranen für die Befeuchtung von Luft - auch Befeuchtermembranen (BM) genannt - geeignet sind.Item Open Access Proton-conducting membranes for the artificial leaf(2023) Bosson, Karell; Tovar, Günter E. M. (Prof.)With the aim of producing proton conducting membranes with improved proton conductivity and mechanical properties, the poly(pentafluorostyrene)-b-(butyl acrylate) (PPFS-b-PBuA) system was investigated. The study mainly focuses on the influence of the forming polymer nanostructures on the conductivity properties of the membranes. A series of well-defined PPFS-b-PBuA block copolymers (BCPs) were synthesized via nitroxide-mediated controlled radical polymerization (NMP). Spontaneous self-assembly of the BCP element was induced via a targeted change in polymer composition. Moreover, by adjusting the molar composition via enrichment of one of the blocks after synthesis, controlled self-assembly of the BCPs was realized. This was done by combining the corresponding homopolymer with the block copolymer to form a polymer blend - one of the blocks mixed to the BCP. Forming such polymer blends expanded the range of available techniques for tailoring the morphology for desired applications. Sulfonation of BCPs for the preparation of proton-conducting membranes was carried out by a para-fluoro thiol "click" reaction using sodium 3-mercapto-1-propanesulfonate (SMPS). The accessibility of fluorine in the para position of the phenylene group of PPFS provides countless opportunities for polymer functionalization by nucleophilic substitution. After modification of BCP, the self-assembly ability was retained, and higher conductivities were obtained compared to random copolymers. In addition, complementary studies were conducted on the use of printing techniques for membrane upscaling and evaluation of their life cycle.