04 Fakultät Energie-, Verfahrens- und Biotechnik

Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/5

Browse

Filters

2020 - 20252

Settings

Author: search.filters.author.Biswas, IndroSubject: search.filters.subject.621.3

Search Results

Now showing 1 - 2 of 2
  • Thumbnail Image
    ItemOpen Access
    Influence of cycling profile, depth of discharge and temperature on commercial LFP/C cell ageing : post-mortem material analysis of structure, morphology and chemical composition
    (2020) Simolka, Matthias; Heger, Jan-Frederik; Kaess, Hanno; Biswas, Indro; Friedrich, K. Andreas
    The paper presents post-mortem analysis of commercial LiFePO4 battery cells, which are aged at 55 °C and - 20 °C using dynamic current profiles and different depth of discharges (DOD). Post-mortem analysis focuses on the structure of the electrodes using atomic force microscopy (AFM) and scanning electron microscopy (SEM) and the chemical composition changes using energy dispersive X-ray spectroscopy (SEM-EDX) and X-ray photoelectron spectroscopy (XPS). The results show that ageing at lower DOD results in higher capacity fading compared to higher DOD cycling. The anode surface aged at 55 °C forms a dense cover on the graphite flakes, while at the anode surface aged at - 20 °C lithium plating and LiF crystals are observed. As expected, Fe dissolution from the cathode and deposition on the anode are observed for the ageing performed at 55 °C, while Fe dissolution and deposition are not observed at - 20 °C. Using atomic force microscopy (AFM), the surface conductivity is examined, which shows only minor degradation for the cathodes aged at - 20 °C. The cathodes aged at 55 °C exhibit micrometer size agglomerates of nanometer particles on the cathode surface. The results indicate that cycling at higher SOC ranges is more detrimental and low temperature cycling mainly affects the anode by the formation of plated Li.
  • Thumbnail Image
    ItemOpen Access
    Investigation of the degradation phenomena of a proton exchange membrane electrolyzer stack by successive replacement of aged components in single cells
    (2025) Kimmel, Benjamin; Morawietz, Tobias; Biswas, Indro; Sata, Noriko; Gazdzicki, Pawel; Gago, Aldo Saul; Friedrich, Kaspar Andreas
    Due to their compactness and high flexibility to operate under dynamic conditions, proton exchange membrane water electrolyzers (PEMWEs) are ideal systems for the production of green hydrogen from renewable energy sources. For the widespread implementation of PEMWEs, an understanding of their degradation mechanism is crucial. In this work, we analyze a commercial PEMWE stack via a novel approach of breaking down from the stack to the single-cell level. Therefore, the disassembled stack components are cut to fit into single cells. Then, the aged components are successively replaced with pristine or regenerated components (cleaned and polished), and electrochemical characterizations are conducted to investigate the contributions of the individual components on performance losses. In addition, several underlying degradation phenomena are identified using different physical ex-situ analysis methods. The catalyst-coated membrane (CCM) contributes the most to performance degradation because of contamination and ionomer rearrangement. Additionally, traces of calcium, likely due to insufficient water purification used during operation or for cleaning the cell components, were found. Significant oxidation was observed on the anodic components, while the electronic conductivity on the cathode side remained unchanged. The combination of electrochemical characterization with stepwise regeneration processes and physical ex-situ analysis allows to draw conclusions about the impact of different components on degradation and to analyze the underlying aging mechanisms occurring in each component.