04 Fakultät Energie-, Verfahrens- und Biotechnik
Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/5
Browse
61 results
Search Results
Item Open Access Precision 3D‐printed cell scaffolds mimicking native tissue composition and mechanics(2020) Erben, Amelie; Hörning, Marcel; Hartmann, Bastian; Becke, Tanja; Eisler, Stephan A.; Southan, Alexander; Cranz, Séverine; Hayden, Oliver; Kneidinger, Nikolaus; Königshoff, Melanie; Lindner, Michael; Tovar, Günter E. M.; Burgstaller, Gerald; Clausen‐Schaumann, Hauke; Sudhop, Stefanie; Heymann, MichaelCellular dynamics are modeled by the 3D architecture and mechanics of the extracellular matrix (ECM) and vice versa. These bidirectional cell‐ECM interactions are the basis for all vital tissues, many of which have been investigated in 2D environments over the last decades. Experimental approaches to mimic in vivo cell niches in 3D with the highest biological conformity and resolution can enable new insights into these cell‐ECM interactions including proliferation, differentiation, migration, and invasion assays. Here, two‐photon stereolithography is adopted to print up to mm‐sized high‐precision 3D cell scaffolds at micrometer resolution with defined mechanical properties from protein‐based resins, such as bovine serum albumin or gelatin methacryloyl. By modifying the manufacturing process including two‐pass printing or post‐print crosslinking, high precision scaffolds with varying Young's moduli ranging from 7‐300 kPa are printed and quantified through atomic force microscopy. The impact of varying scaffold topographies on the dynamics of colonizing cells is observed using mouse myoblast cells and a 3D‐lung microtissue replica colonized with primary human lung fibroblast. This approach will allow for a systematic investigation of single‐cell and tissue dynamics in response to defined mechanical and bio‐molecular cues and is ultimately scalable to full organs.Item Open Access Identifying and engineering bottlenecks of autotrophic isobutanol formation in recombinant C. ljungdahlii by systemic analysis(2021) Hermann, Maria; Teleki, Attila; Weitz, Sandra; Niess, Alexander; Freund, Andreas; Bengelsdorf, Frank Robert; Dürre, Peter; Takors, RalfClostridium ljungdahlii (C. ljungdahlii, CLJU) is natively endowed producing acetic acid, 2,3-butandiol, and ethanol consuming gas mixtures of CO2, CO, and H2 (syngas). Here, we present the syngas-based isobutanol formation using C. ljungdahlii harboring the recombinant amplification of the “Ehrlich” pathway that converts intracellular KIV to isobutanol. Autotrophic isobutanol production was studied analyzing two different strains in 3-L gassed and stirred bioreactors. Physiological characterization was thoroughly applied together with metabolic profiling and flux balance analysis. Thereof, KIV and pyruvate supply were identified as key “bottlenecking” precursors limiting preliminary isobutanol formation in CLJU[KAIA] to 0.02 g L-1. Additional blocking of valine synthesis in CLJU[KAIA]:ilvE increased isobutanol production by factor 6.5 finally reaching 0.13 g L-1. Future metabolic engineering should focus on debottlenecking NADPH availability, whereas NADH supply is already equilibrated in the current generation of strains.Item Open Access Application of ion chromatography for the reliable quantification of ammonium in electrochemical ammonia synthesis experiments : a practical guide(2023) Bragulla, Sebastian C. H.; Lorenz, Julian; Harms, Corinna; Wark, Michael; Friedrich, K. AndreasAssessing novel electrocatalysts for the electrochemical ammonia synthesis (EAS) requires reliable quantitative trace analysis of electrochemically produced ammonia to infer activity and selectivity. This study concerns the development of an ion chromatography (IC) method for quantitative trace analysis of ammonium in 0.1 M sulfuric acid electrolyte, which is applied to EAS gas-diffusion electrode (GDE) experiments with commercial chromium nitride as electrocatalyst. The developed IC method is highly sensitive, versatile, and reliable, achieving a limit of quantification (LOQ) of 6 μg l-1 (6 ppbmol) ammonium. The impacts of the sample matrix, dilution, and neutralization, as well as contamination, on the quantitative analysis by IC are analyzed. Experimental constraints result in an effective LOQ including dilution of 60 μg l-1 for the determination of ammonium in 0.1 M sulfuric acid electrolyte, owing to necessary sample dilution. The practical guide presented herein is intended to be very relevant for the field of EAS as a guideline and applicable to a broad range of catalyst systems and ion chromatography devices.Item Open Access Acid catalyzed cross‐linking of polyvinyl alcohol for humidifier membranes(2021) Michele, Andre; Paschkowski, Patrick; Hänel, Christopher; Tovar, Günter E. M.; Schiestel, Thomas; Southan, AlexanderPolyvinyl alcohol (PVA) is a hydrophilic polymer well known for good film forming properties, high water vapor permeance JW, and low nitrogen permeance. However, depending on molar mass and temperature, PVA swells strongly in water until complete dissolution. This behavior affects the usability of PVA in aqueous environments and makes cross‐linking necessary if higher structural integrity is envisaged. In this work, PVA networks are formed by thermal cross‐linking in the presence of p‐toluenesulfonic acid (TSA) and investigated in a design of experiments approach. Experimental parameters are the cross‐linking period tc, temperature ϑ and the TSA mass fraction wTSA. Cross‐linking is found to proceed via ether bond formation at all reaction conditions. Degradation is promoted especially by a combination of high wTSA, tc and ϑ. Thermal stability of the networks after preparation is strongly improved by neutralizing residual TSA. Humidification membranes with a JW of 6423 ± 63.0 gas permeation units (GPU) are fabricated by coating PVA on polyvinyliden fluoride hollow fibers and cross‐linking with TSA. Summarizing, the present study contributes to a clearer insight into the cross‐linking of PVA in presence of TSA, the thermal stability of the resulting networks and the applicability as selective membrane layers for water vapor transfer.Item Open Access Multistep reactions of molten nitrate salts and gas atmospheres(2024) Steinbrecher, Julian; Thess, André (Prof. Dr.)Dissertation zur Untersuchung der Stabilität von Nitratsalzschmelzen unter verschiedenen atmosphärischen Bedingungen und Temperaturen.Item Open Access Flux calculation for primary metabolism reveals changes in allocation of nitrogen to different amino acid families when photorespiratory activity changes(2024) Friedrichs, Nils; Shokouhi, Danial; Heyer, Arnd G.Photorespiration, caused by oxygenation of the enzyme Rubisco, is considered a wasteful process, because it reduces photosynthetic carbon gain, but it also supplies amino acids and is involved in amelioration of stress. Here, we show that a sudden increase in photorespiratory activity not only reduced carbon acquisition and production of sugars and starch, but also affected diurnal dynamics of amino acids not obviously involved in the process. Flux calculations based on diurnal metabolite profiles suggest that export of proline from leaves increases, while aspartate family members accumulate. An immense increase is observed for turnover in the cyclic reaction of glutamine synthetase/glutamine-oxoglutarate aminotransferase (GS/GOGAT), probably because of increased production of ammonium in photorespiration. The hpr1-1 mutant, defective in peroxisomal hydroxypyruvate reductase, shows substantial alterations in flux, leading to a shift from the oxoglutarate to the aspartate family of amino acids. This is coupled to a massive export of asparagine, which may serve in exchange for serine between shoot and root.Item Open Access Thin organic‐inorganic anti‐fouling hybrid‐films for microreactor components(2022) Neßlinger, Vanessa; Welzel, Stefan; Rieker, Florian; Meinderink, Dennis; Nieken, Ulrich; Grundmeier, GuidoDeposit formation and fouling in reactors for polymer production and processing especially in microreactors is a well‐known phenomenon. Despite the flow and pressure loss optimized static mixers, fouling occurs on the surfaces of the mixer elements. To improve the performance of such parts even further, stainless steel substrates are coated with ultra‐thin films which have low surface energy, good adhesion, and high durability. Perfluorinated organosilane (FOTS) films deposited via chemical vapor deposition (CVD) are compared with FOTS containing zirconium oxide sol‐gel films regarding the prevention of deposit formation and fouling during polymerization processes in microreactors. Both film structures led to anti‐adhesive properties of microreactor component surfaces during aqueous poly(vinylpyrrolidone) (PVP) synthesis. To determine the morphology and surface chemistry of the coatings, different characterization methods such as X‐ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopy as well as microscopic methods such as field‐emission scanning electron microscopy (FE‐SEM) and atomic force microscopy (AFM) are applied. The surface free energy and wetting properties are analyzed by means of contact angle measurements. The application of thin film‐coated mixing elements in a microreactor demonstrates a significant lowering in pressure increase caused by a reduced deposit formation.Item Open Access S‐adenosylmethionine and methylthioadenosine boost cellular productivities of antibody forming Chinese hamster ovary cells(2020) Verhagen, Natascha; Teleki, Attila; Heinrich, Christoph; Schilling, Martin; Unsöld, Andreas; Takors, RalfThe improvement of cell specific productivities for the formation of therapeutic proteins is an important step towards intensified production processes. Among others, the induction of the desired production phenotype via proper media additives is a feasible solution provided that said compounds adequately trigger metabolic and regulatory programs inside the cells. In this study, S‐(5′‐adenosyl)-l‐methionine (SAM) and 5′‐deoxy‐5′‐(methylthio)adenosine (MTA) were found to stimulate cell specific productivities up to approx. 50% while keeping viable cell densities transiently high and partially arresting the cell cycle in an anti‐IL‐8‐producing CHO‐DP12 cell line. Noteworthy, MTA turned out to be the chemical degradation product of the methyl group donor SAM and is consumed by the cells.Item Open Access Coumarin-4-ylmethyl- and p-hydroxyphenacyl-based photoacid generators with high solubility in aqueous media: synthesis, stability and photolysis(2020) Adatia, Karishma K.; Halbritter, Thomas; Reinfelds, Matiss; Michele, Andre; Tran, Michael; Laschat, Sabine; Heckel, Alexander; Tovar, Günter E. M.; Southan, Alexander(Coumarin‐4‐yl)methyl (c4m) and p‐hydroxyphenacyl (pHP)‐based compounds are well known for their highly efficient photoreactions, but often show limited solubility in aqueous media. To circumvent this, we synthesized and characterized the two new c4m and pHP‐based photoacid generators (PAGs), 7‐[bis(carboxymethyl)amino]‐4‐(acetoxymethyl)coumarin (c4m‐ac) and p‐hydroxyphenacyl‐2,5,8,11‐tetraoxatridecan‐13‐oate (pHP‐t), and determined their solubilities, stabilities and photolysis in aqueous media. The two compounds showed high solubilities in water of 2.77 mmol L−1±0.07 mmol L−1 (c4m‐ac) and 124.66 mmol L−1±2.1 mmol L−1 (pHP‐t). In basic conditions at pH 9, solubility increased for c4m‐ac to 646.46 mmol L−1±0.63 mmol L−1, for pHP‐t it decreased to 34.68 mmol L−1±0.62 mmol L−1. Photochemical properties of the two PAGs, such as the absorption maxima, the maximum molar absorption coefficients and the quantum yields, were found to be strongly pH‐dependent. Both PAGs showed high stabilities s24h ≥95 % in water for 24 h, but decreasing stability with increasing pH value due to hydrolysis. The present study contributes to a clearer insight into the synthesis, solubilities, stabilities, and photolysis of c4m and pHP‐based PAGs for further photochemical applications when high PAG concentrations are required, such as in polymeric foaming.Item Open Access Polyphosphat : ein unterschätztes Molekül(2022) Jendrossek, Dieter; Hildenbrand, Jennie C.Polyphosphate (polyP) is an inorganic biopolymer ubiquitously present in all species. It has a variety of functions ranging from that of a reservoir for phosphorous in many microorganisms to functions in blood coagulation and plays a role in neurogenerative diseases in humans. Here, we provide a summary of the structure and functions that have been addressed to polyP in microorganisms.