Please use this identifier to cite or link to this item: http://dx.doi.org/10.18419/opus-410
|Title:||The rotation capacity of plastic hinges in reinforced concrete beams and slabs|
|metadata.ubs.publikation.source:||Fundamental developments in design models. Lausanne : CEB, 1987 (Bulletin d'information / CEB 178/179), S. 93-102|
|Abstract:||A mathematical model for calculating the rotation capacity of plastic hinges in reinforced concrete beams and slabs is presented. The model is based on the integration of the section curvature along the beam, taking into account the contribution of concrete between cracks (tension stiffening) and the shifting of the tensile force by shear cracks. The material behavior of reinforcing bars, concrete and bond is described as realistically as possible. The analytically predicted rotation capacities of about 70 beams compare favourably with the experimental results. The parameter studies demonstrate that the plastic rotation capacity of hinges given by the CEB-FIP Model Code is unconservative for cold worked yield stress and a low value of the uniform elongation.|
|Appears in Collections:||02 Fakultät Bau- und Umweltingenieurwissenschaften|
Items in OPUS are protected by copyright, with all rights reserved, unless otherwise indicated.