03 Fakultät Chemie

Now showing 1 - 3 of 3

Open Access
CHEMampere : technologies for sustainable chemical production with renewable electricity and CO2, N2, O2, and H2O
(2022) Klemm, Elias; Lobo, Carlos M. S.; Löwe, Armin; Schallhart, Verena; Renninger, Stephan; Waltersmann, Lara; Costa, Rémi; Schulz, Andreas; Dietrich, Ralph‐Uwe; Möltner, Lukas; Meynen, Vera; Sauer, Alexander; Friedrich, K. Andreas
The chemical industry must become carbon neutral by 2050, meaning that process‐, energy‐, and product‐related CO2 emissions from fossil sources are completely suppressed. This goal can only be reached by using renewable energy, secondary raw materials, or CO2 as a carbon source. The latter can be done indirectly through the bioeconomy or directly by utilizing CO2 from air or biogenic sources (integrated biorefinery). Until 2030, CO2 waste from fossil‐based processes can be utilized to curb fossil CO2 emissions and reach the turning point of global fossil CO2 emissions. A technology mix consisting of recycling technologies, white biotechnology, and carbon capture and utilization (CCU) technologies is needed to achieve the goal of carbon neutrality. In this context, CHEMampere contributes to the goal of carbon neutrality with electricity‐based CCU technologies producing green chemicals from CO2, N2, O2, and H2O in a decentralized manner. This is an alternative to the e‐Refinery concept, which needs huge capacities of water electrolysis for a centralized CO2 conversion with green hydrogen, whose demand is expected to rise dramatically due to the decarbonization of the energy sector, which would cause a conflict of use between chemistry and energy. Here, CHEMampere's core reactor technologies, that is, electrolyzers, plasma reactors, and ohmic resistance heating of catalysts, are described, and their technical maturity is evaluated for the CHEMampere platform chemicals NH3, NOx, O3, H2O2, H2, CO, and CxHyOz products such as formic acid or methanol. Downstream processing of these chemicals is also addressed by CHEMampere, but it is not discussed here.
Open Access
Crystal structure and XPS study of titanium-substituted M-type hexaferrite BaFe12−xTixO19
(2023) Mehnert, Kim-Isabelle; Häßner, Manuel; Dreer, Yanina Mariella; Biswas, Indro; Niewa, Rainer
The M-type barium hexaferrite substituted with titanium, BaFe12−xTixO19, was synthesized from sodium carbonate flux and the obtained single crystals with a maximum degree of substitution of up to about x = 0.9 were characterized. XPS measurements were carried out for the identification of side products and in particular in order to assign the valence states of the transition-metal constituents. Due to the aliovalent exchange of iron(III) with titanium(IV), an additional charge balance needs to occur. No titanium(III) was detected, while the amount of iron(II) increased in the same order of magnitude as the amount of titanium(IV); thus, the major charge balancing is attributed to the reduction of iron(III) to iron(II). According to the XPS data, the amount of titanium(IV) typically is slightly higher than that of iron(II). This is in line with a tendency to a minor formation of vacancies on the transition-metal sites becoming more important at higher substitution levels according to PXRD and WDS measurements, completing the picture of the charge-balance mechanism. XRD taken on single crystals indicates the distribution of titanium and vacancies over three of the five transition-metal sites.
Open Access
A review of the MSCA ITN ECOSTORE : novel complex metal hydrides for efficient and compact storage of renewable energy as hydrogen and electricity
(2020) Hadjixenophontos, Efi; Dematteis, Erika Michela; Berti, Nicola; Wołczyk, Anna Roza; Huen, Priscilla; Brighi, Matteo; Le, Thi Thu; Santoru, Antonio; Payandeh, Seyed Hosein; Peru, Filippo; Dao, Anh Ha; Liu, Yinzhe; Heere, Michael
Hydrogen as an energy carrier is very versatile in energy storage applications. Developments in novel, sustainable technologies towards a CO2-free society are needed and the exploration of all-solid-state batteries (ASSBs) as well as solid-state hydrogen storage applications based on metal hydrides can provide solutions for such technologies. However, there are still many technical challenges for both hydrogen storage material and ASSBs related to designing low-cost materials with low-environmental impact. The current materials considered for all-solid-state batteries should have high conductivities for Na+, Mg2+ and Ca2+, while Al3+-based compounds are often marginalised due to the lack of suitable electrode and electrolyte materials. In hydrogen storage materials, the sluggish kinetic behaviour of solid-state hydride materials is one of the key constraints that limit their practical uses. Therefore, it is necessary to overcome the kinetic issues of hydride materials before discussing and considering them on the system level. This review summarizes the achievements of the Marie Skłodowska-Curie Actions (MSCA) innovative training network (ITN) ECOSTORE, the aim of which was the investigation of different aspects of (complex) metal hydride materials. Advances in battery and hydrogen storage materials for the efficient and compact storage of renewable energy production are discussed.

03 Fakultät Chemie

Browse

Filters

Settings

Sort By

Results per page

Search Results