03 Fakultät Chemie
Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/4
Browse
99 results
Search Results
Item Open Access Extremely narrow superconducting band with crystal spin 3/2h in LaH10(2023) Krüger, EkkehardItem Open Access Finite-temperature interplay of structural stability, chemical complexity, and elastic properties of bcc multicomponent alloys from ab initio trained machine-learning potentials(2021) Gubaev, Konstantin; Ikeda, Yuji; Tasnádi, Ferenc; Neugebauer, Jörg; Shapeev, Alexander V.; Grabowski, Blazej; Körmann, FritzAn active learning approach to train machine-learning interatomic potentials (moment tensor potentials) for multicomponent alloys to ab initio data is presented. Employing this approach, the disordered body-centered cubic (bcc) TiZrHfTax system with varying Ta concentration is investigated via molecular dynamics simulations. Our results show a strong interplay between elastic properties and the structural ω phase stability, strongly affecting the mechanical properties. Based on these insights we systematically screen composition space for regimes where elastic constants show little or no temperature dependence (elinvar effect).Item Open Access Molecular dynamics simulations of screw dislocation mobility in bcc Nb(2021) Zotov, Nikolay; Grabowski, BlazejThe screw dislocation mobility in bcc Nb has been studied by molecular dynamics (MD) simulations at different strain rates and temperatures using an embedded-atom method (EAM) potential. Static properties of the screw dislocation, as determined with the EAM potential, are in agreement with previous density-functional-theory calculations. The elementary slip plane of the screw dislocation remains (110) for all studied strain rates (in the range 6.3 × 107-6.3 × 109 s-1) and temperatures (5 to 550 K). However, the consecutive cross-slip on different symmetry-equivalent (110) planes leads to an effective glide on (112) planes. It is demonstrated that the screw dislocation trajectories, velocities and waviness of the screw dislocation depend on the crystallographic indices, (110) or (112), of the maximum resolved shear stress plane. The waiting time for the start of the screw dislocation motion increases exponentially with decreasing strain rate, substantiating the necessity to apply in future accelerated MD techniques in order to compare with macroscopic stress-strain experiments.Item Open Access Magnetic Moment Tensor Potentials for collinear spin-polarized materials reproduce different magnetic states of bcc Fe(2022) Novikov, Ivan; Grabowski, Blazej; Körmann, Fritz; Shapeev, AlexanderWe present the magnetic Moment Tensor Potentials (mMTPs), a class of machine-learning interatomic potentials, accurately reproducing both vibrational and magnetic degrees of freedom as provided, e.g., from first-principles calculations. The accuracy is achieved by a two-step minimization scheme that coarse-grains the atomic and the spin space. The performance of the mMTPs is demonstrated for the prototype magnetic system bcc iron, with applications to phonon calculations for different magnetic states, and molecular-dynamics simulations with fluctuating magnetic moments.Item Open Access Field evaporation and atom probe tomography of pure water tips(2020) Schwarz, T. M.; Weikum, E. M.; Meng, K.; Hadjixenophontos, E.; Dietrich, C. A.; Kästner, J.; Stender, P.; Schmitz, G.Measuring biological samples by atom probe tomography (APT) in their natural environment, i.e. aqueous solution, would take this analytical method, which is currently well established for metals, semi-conductive materials and non-metals, to a new level. It would give information about the 3D chemical structure of biological systems, which could enable unprecedented insights into biological systems and processes, such as virus protein interactions. For this future aim, we present as a first essential step the APT analysis of pure water (Milli-Q) which is the main component of biological systems. After Cryo-preparation, nanometric water tips are field evaporated with assistance by short laser pulses. The obtained data sets of several tens of millions of atoms reveal a complex evaporation behavior. Understanding the field evaporation process of water is fundamental for the measurement of more complex biological systems. For the identification of the individual signals in the mass spectrum, DFT calculations were performed to prove the stability of the detected molecules.Item Open Access Adjustable polystyrene nanoparticle templates for the production of mesoporous foams and ZnO inverse opals(2020) Abitaev, Karina; Qawasmi, Yaseen; Atanasova, Petia; Dargel, Carina; Bill, Joachim; Hellweg, Thomas; Sottmann, ThomasThe manifold applications of porous materials, such as in storage, separation, and catalysis, have led to an enormous interest in their cost-efficient preparation. A promising strategy to obtain porous materials with adjustable pore size and morphology is to use templates exhibiting the appropriate nanostructure. In this study, close-packed polystyrene (PS) nanoparticles, synthesized by emulsion polymerization, were used to produce porous PS and ZnO inverse opals. The size and distribution of the polystyrene nanoparticles, characterized by dynamic light scattering (DLS), small-angle neutron scattering (SANS), and scanning electron microscopy (SEM), were controlled via the concentration of sodium dodecyl sulfate (SDS). Systematic measurements of the water/styrene-interfacial tension show that the critical micelle concentration (CMC) of the ternary water–styrene–SDS system, which determines whether monodisperse or polydisperse PS particles are obtained, is considerably lower than that of the binary water–SDS system. The assemblies of close-packed PS nanoparticles obtained via drying were then studied by small-angle X-ray scattering (SAXS) and SEM. Both techniques prove that PS nanoparticles synthesized above the CMC result in a significantly unordered but denser packing of the particles. The polystyrene particles were subsequently used to produce porous polystyrene and ZnO inverse opals. While the former consists of micrometer-sized spherical pores surrounded by extended open-cellular regions of mesopores (Rpore ≈ 25 nm), the latter are made of ZnO-nanoparticles forming a structure of well-aligned interconnected pores.Item Open Access Strong impact of spin fluctuations on the antiphase boundaries of weak itinerant ferromagnetic Ni3Al(2023) Xu, Xiang; Zhang, Xi; Ruban, Andrei; Schmauder, Siegfried; Grabowski, BlazejAntiphase boundaries (APBs) are crucial to understand the anomalous temperature dependence of the yield stress of Ni3Al. However, the required, accurate prediction of temperature-dependent APB energies has been missing. In particular, the impact of magnetism at elevated temperatures has been mostly neglected, based on the argument that Ni3Al is a weak ferromagnet. Here, we show that this is an inappropriate assumption and that - in addition to anharmonic and electronic excitations - thermally-induced magnetic spin fluctuations strongly affect the APB energies, especially for the (100)APB with an increase of nearly up to 40% over the nonmagnetic data. We utilize an ab initio framework that incorporates explicit lattice vibrations, electronic excitations, and the impact of magnetic excitations up to the melting temperature. Our results prompt to take full account of thermally-induced spin fluctuations even for weak itinerant ferromagnetic materials. Consequences for large-scale modeling in Ni-based superalloys, e.g., of dislocations or the elastic-plastic behavior, can be expected.Item Open Access Efficient approach to compute melting properties fully from ab initio with application to Cu(2017) Zhu, Li-Fang; Grabowski, Blazej; Neugebauer, JörgApplying thermodynamic integration within an ab initio-based free-energy approach is a state-of-the-art method to calculate melting points of materials. However, the high computational cost and the reliance on a good reference system for calculating the liquid free energy have so far hindered a general application. To overcome these challenges, we propose the two-optimized references thermodynamic integration using Langevin dynamics (TOR-TILD) method in this work by extending the two-stage upsampled thermodynamic integration using Langevin dynamics (TU-TILD) method, which has been originally developed to obtain anharmonic free energies of solids, to the calculation of liquid free energies. The core idea of TOR-TILD is to fit two empirical potentials to the energies from density functional theory based molecular dynamics runs for the solid and the liquid phase and to use these potentials as reference systems for thermodynamic integration. Because the empirical potentials closely reproduce the ab initio system in the relevant part of the phase space the convergence of the thermodynamic integration is very rapid. Therefore, the proposed approach improves significantly the computational efficiency while preserving the required accuracy. As a test case, we apply TOR-TILD to fcc Cu computing not only the melting point but various other melting properties, such as the entropy and enthalpy of fusion and the volume change upon melting. The generalized gradient approximation (GGA) with the Perdew-Burke-Ernzerhof (PBE) exchange-correlation functional and the local-density approximation (LDA) are used. Using both functionals gives a reliable ab initio confidence interval for the melting point, the enthalpy of fusion, and entropy of fusion.Item Open Access Peptide controlled shaping of biomineralized tin(II) oxide into flower-like particles(2019) Kilper, Stefan; Jahnke, Timotheus; Wiegers, Katharina; Grohe, Vera; Burghard, Zaklina; Bill, Joachim; Rothenstein, DirkThe size and morphology of metal oxide particles have a large impact on the physicochemical properties of these materials, e.g., the aspect ratio of particles affects their catalytic activity. Bioinspired synthesis routes give the opportunity to control precisely the structure and aspect ratio of the metal oxide particles by bioorganic molecules, such as peptides. This study focusses on the identification of tin(II) oxide (tin monoxide, SnO) binding peptides, and their effect on the synthesis of crystalline SnO microstructures. The phage display technique was used to identify the 7-mer peptide SnBP01 (LPPWKLK), which shows a high binding affinity towards crystalline SnO. It was found that the derivatives of the SnBP01 peptide, varying in peptide length and thus in their interaction, significantly affect the aspect ratio and the size dimension of mineralized SnO particles, resulting in flower-like morphology. Furthermore, the important role of the N-terminal leucine residue in the peptide for the strong organic-inorganic interaction was revealed by FTIR investigations. This bioinspired approach shows a facile procedure for the detailed investigation of peptide-to-metal oxide interactions, as well as an easy method for the controlled synthesis of tin(II) oxide particles with different morphologies.Item Open Access Influence of zinc on the calcium carbonate biomineralization of Halomonas halophila(2012) Rothenstein, Dirk; Baier, Johannes; Schreiber, Thomas D.; Barucha, Vera; Bill, JoachimBackground: The salt tolerance of halophilic bacteria make them promising candidates for technical applications, like isolation of salt tolerant enzymes or remediation of contaminated saline soils and waters. Furthermore, some halophilic bacteria synthesize inorganic solids resulting in organic-inorganic hybrids. This process is known as biomineralization, which is induced and/or controlled by the organism. The adaption of the soft and eco-friendly reaction conditions of this formation process to technical syntheses of inorganic nano materials is desirable. In addition, environmental contaminations can be entrapped in biomineralization products which facilitate the subsequent removal from waste waters. The moderately halophilic bacteria Halomonas halophila mineralize calcium carbonate in the calcite polymorph. The biomineralization process was investigated in the presence of zinc ions as a toxic model contaminant. In particular, the time course of the mineralization process and the influence of zinc on the mineralized inorganic materials have been focused in this study. Results: H. halophila can adapt to zinc contaminated medium, maintaining the ability for biomineralization of calcium carbonate. Adapted cultures show only a low influence of zinc on the growth rate. In the time course of cultivation, zinc ions accumulated on the bacterial surface while the medium depleted in the zinc contamination. Intracellular zinc concentrations were below the detection limit, suggesting that zinc was mainly bound extracellular. Zinc ions influence the biomineralization process. In the presence of zinc, the polymorphs monohydrocalcite and vaterite were mineralized, instead of calcite which is synthesized in zinc-free medium. Conclusions: We have demonstrated that the bacterial mineralization process can be influenced by zinc ions resulting in the modification of the synthesized calcium carbonate polymorph. In addition, the shape of the mineralized inorganic material is chancing through the presence of zinc ions. Furthermore, the moderately halophilic bacterium H. halophila can be applied for the decontamination of zinc from aqueous solutions.