03 Fakultät Chemie

Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/4

Browse

Institute: search.filters.UBSInstitut.Institut für Technische ChemieAuthor: search.filters.author.Dittmann, Daniel

Search Results

Now showing 1 - 5 of 5
  • Thumbnail Image
    ItemOpen Access
  • Thumbnail Image
    ItemOpen Access
    Desilicated ZSM‐5 catalysts : properties and ethanol to aromatics (ETA) performance
    (2023) Dittmann, Daniel; Kaya, Elif; Dyballa, Michael
    Herein, desilication in increasingly harsh conditions was used to introduce mesopores into two different industrial ZSM‐5 catalysts (Si/Al ratio 11 or 29). For desilicated samples, increasing BET surface areas, mesopore volumes, and Si(OH) densities were noted. Brønsted acid site (BAS) densities increased upon desilication, as formerly inaccessible BAS in blocked pores became available, while the strength of the BAS was maintained upon desilication. Using KOH instead of NaOH as desilication agent can increase the mesopore volume generated per mass loss. The correlations between desilication strength and properties were largely determined by the parent Si/Al ratio. In general the introduced mesopores increased lifetimes in the ETA conversion, while additional Si(OH) groups introduced by desilication reduce the lifetime again. The lifetime is thus determined by a complex interplay of BAS density, improved reactant transport by introduced mesopores and Si(OH) density. There were no additional aromatics formed in desilicated samples during the conversion of ethanol and the samples were, in terms of aromatic yield, outperformed by a microporous parent. However, as result of longer lifetimes less ethanol was lost due to coke formation. It is concluded that desilication should be combined with other post‐modifications to increase aromatic production and lifetime.
  • Thumbnail Image
    ItemOpen Access
    Cu(dppf) complexes can be synthesized from Cu-exchanged solids and enable a quantification of the Cu-accessibility by 31P MAS NMR spectroscopy
    (2024) Kaya, Elif; Dittmann, Daniel; Schmidt, Maximilian; Dyballa, Michael
    Herein, we apply three different copper-exchanged materials (Na-[Al]SBA-15, silica, Na-MCM-22) as hosts for a direct synthesis of CuI(1,1'-bis(diphenylphosphino)ferrocene = dppf) complexes in cationic ion exchange position. Using 31P MAS NMR spectroscopy, we show that identical complexes as after ion exchange are generated if the solids are applied as reactants directly. The homogeneity of copper exchanges is evaluated by EDX spectroscopy. Both CuI and CuII result in the formation of complexes, thereby oxidizing dppf. Cu-particles were not reactive. Optimized conditions for a maximized complex formation are identified applying quantitative 31P MAS NMR spectroscopy and ICP-OES. Only accessible copper in cationic position of the solids forms the complexes. This enables a quantification of the amount of copper in mesopores vs. the total copper amount. Thus, besides a new synthesis of the complex a suitable method for quantitative elucidation of the location of copper cations is demonstrated herein.
  • Thumbnail Image
    ItemOpen Access
    Influence of ZSM-5 crystal size on methanol-to-olefin (MTO) vs. ethanol-to-aromatics (ETA) conversion
    (2023) Dittmann, Daniel; Kaya, Elif; Strassheim, Dennis; Dyballa, Michael
    Crystal size is a key parameter of zeolites applied as catalysts. Herein, ZSM-5 crystals with similar physicochemical and acid properties, few defects, and aluminum exclusively in tetrahedral coordination are synthesized and the influence of the crystal size on the MTO and ETA conversion is investigated. Short olefins are the main products of the MTO conversion, whereas larger olefins and aromatics dominate the products after ETA conversion. In the case of both feeds, an increased crystal size decreases the catalyst’s lifetime. The MTO conversion over larger ZSM-5 altered the product distribution, which was not the case for the ETA conversion. The reason is that the instantly available aromatics during ETA conversion lead to fast coking and zeolite crystals only active in the outer layers. Thus, the different reactivity of different-sized ZSM-5 is direct proof of a different conversion mechanism for both alcohols.
  • Thumbnail Image
    ItemOpen Access
    Higher BTEX aromatic yield from ethanol over desilicated H,Zn-[Al]ZSM-5 catalysts
    (2024) Dittmann, Daniel; Ileri, Alime; Strassheim, Dennis; Dyballa, Michael
    The amount of BTEX aromatics obtained from the conversion of ethanol (ETA) is increased by combining ZSM-5 catalysts having optimum acidity with desilication and zinc ion exchange. Zinc leads to preferred dehydrogenation instead of hydrogen transfer. It decreases the share of paraffin products and increases BTEX contents (up to SBTEX = 50%) at the cost of lifetime. The latter can be increased via desilication. An ethylene feed increases lifetime and BTEX production as result of oxygenate absence. Combination of improvements resulted in a C2 conversion capacity of 206 g g-1 and a total yield of BTEX aromatics of 31.6 g g-1, which is about a factor of 2-3 times better than the respective values found for microporous, mesoporous, or microporous Zn-exchanged materials. In situ UV/vis spectra reveal that desilicated samples coke significantly slower than microporous samples, whereas Zn exchange supports the formation of coke. Thus, by a clever combination of suitable post-modifications, a significantly higher BTEX production from the primary source ethanol can be achieved.