03 Fakultät Chemie
Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/4
Browse
8 results
Search Results
Item Open Access Adjustable polystyrene nanoparticle templates for the production of mesoporous foams and ZnO inverse opals(2020) Abitaev, Karina; Qawasmi, Yaseen; Atanasova, Petia; Dargel, Carina; Bill, Joachim; Hellweg, Thomas; Sottmann, ThomasThe manifold applications of porous materials, such as in storage, separation, and catalysis, have led to an enormous interest in their cost-efficient preparation. A promising strategy to obtain porous materials with adjustable pore size and morphology is to use templates exhibiting the appropriate nanostructure. In this study, close-packed polystyrene (PS) nanoparticles, synthesized by emulsion polymerization, were used to produce porous PS and ZnO inverse opals. The size and distribution of the polystyrene nanoparticles, characterized by dynamic light scattering (DLS), small-angle neutron scattering (SANS), and scanning electron microscopy (SEM), were controlled via the concentration of sodium dodecyl sulfate (SDS). Systematic measurements of the water/styrene-interfacial tension show that the critical micelle concentration (CMC) of the ternary water–styrene–SDS system, which determines whether monodisperse or polydisperse PS particles are obtained, is considerably lower than that of the binary water–SDS system. The assemblies of close-packed PS nanoparticles obtained via drying were then studied by small-angle X-ray scattering (SAXS) and SEM. Both techniques prove that PS nanoparticles synthesized above the CMC result in a significantly unordered but denser packing of the particles. The polystyrene particles were subsequently used to produce porous polystyrene and ZnO inverse opals. While the former consists of micrometer-sized spherical pores surrounded by extended open-cellular regions of mesopores (Rpore ≈ 25 nm), the latter are made of ZnO-nanoparticles forming a structure of well-aligned interconnected pores.Item Open Access Asymmetric Rh diene catalysis under confinement : isoxazole ring‐contraction in mesoporous solids(2024) Marshall, Max; Dilruba, Zarfishan; Beurer, Ann‐Katrin; Bieck, Kira; Emmerling, Sebastian; Markus, Felix; Vogler, Charlotte; Ziegler, Felix; Fuhrer, Marina; Liu, Sherri S. Y.; Kousik, Shravan R.; Frey, Wolfgang; Traa, Yvonne; Bruckner, Johanna R.; Plietker, Bernd; Buchmeiser, Michael R.; Ludwigs, Sabine; Naumann, Stefan; Atanasova, Petia; Lotsch, Bettina V.; Zens, Anna; Laschat, SabineCovalent immobilization of chiral dienes in mesoporous solids for asymmetric heterogeneous catalysis is highly attractive. In order to study confinement effects in bimolecular vs monomolecular reactions, a series of pseudo‐C2‐symmetrical tetrahydropentalenes was synthesized and immobilized via click reaction on different mesoporous solids (silica, carbon, covalent organic frameworks) and compared with homogeneous conditions. Two types of Rh‐catalyzed reactions were studied: (a) bimolecular nucleophilic 1,2‐additions of phenylboroxine to N‐tosylimine and (b) monomolecular isomerization of isoxazole to 2H‐azirne. Polar support materials performed better than non‐polar ones. Under confinement, bimolecular reactions showed decreased yields, whereas yields in monomolecular reactions were only little affected. Regarding enantioselectivity the opposite trend was observed, i. e. effective enantiocontrol for bimolecular reactions but only little control for monomolecular reactions was found.Item Open Access Hydrosilylation of alkynes under continuous flow using polyurethane‐based monolithic supports with tailored mesoporosity(2022) Acikalin, Hande; Panyam, Pradeep K. R.; Shaikh, Abdul Wasif; Wang, Dongren; Kousik, Shravan R.; Atanasova, Petia; Buchmeiser, Michael R.Non‐porous polyurethane‐based monoliths are prepared under solvent‐induced phase separation conditions. They possess low specific surface areas of 0.15 m2 g-1, pore volumes of 1 µL g-1, and a non‐permanent, solvent‐induced microporosity with pore dimensions ≤1 nm. Mesoporosity can be introduced by varying the monomers and solvents. A tuning of the average solubility parameter of the solvent mixture by increasing the macroporogen content results in a decrease in the volume fraction of micropores from 70% to 40% and an increase in the volume fraction of pores in the range of 1.7-9.6 nm from 22% to 41% with only minor changes in the volume fraction of larger mesopores in the range of 9.6–50 nm. The polymeric monoliths are functionalized with quaternary ammonium groups, which allowed for the immobilization of an ionic liquid that contained the ionic Rh‐catalyst [1‐(pyrid‐2‐yl)‐3‐mesityl)‐imidazol‐2‐ylidene))(η4‐1,5‐cyclooctadiene)Rh(I) tetrafluoroborate]. The supported catalyst is used in the hydrosilylation of 1‐alkynes with dimethylphenylsilane under continuous flow using methyl‐tert‐butyl ether as second liquid transport phase. E/Z‐selectivity in hydrosilylation is compared to the one of the analogous biphasic reactions. The strong increase in Z‐selectivity is attributed to a confinement effect provided by the small mesopores.Item Open Access From macro to mesoporous ZnO inverse opals : synthesis, characterization and tracer diffusion properties(2021) Kousik, Shravan; Sipp, Diane; Abitaev, Karina; Li, Yawen; Sottmann, Thomas; Koynov, Kaloian; Atanasova, PetiaOxide inverse opals (IOs) with their high surface area and open porosity are promising candidates for catalyst support applications. Supports with confined mesoporous domains are of added value to heterogeneous catalysis. However, the fabrication of IOs with mesoporous or sub-macroporous voids (<100 nm) continues to be a challenge, and the diffusion of tracers in quasi-mesoporous IOs is yet to be adequately studied. In order to address these two problems, we synthesized ZnO IOs films with tunable pore sizes using chemical bath deposition and template-based approach. By decreasing the size of polystyrene (PS) template particles towards the mesoporous range, ZnO IOs with 50 nm-sized pores and open porosity were synthesized. The effect of the template-removal method on the pore geometry (spherical vs. gyroidal) was studied. The infiltration depth in the template was determined, and the factors influencing infiltration were assessed. The crystallinity and photonic stop-band of the IOs were studied using X-Ray diffraction and UV-Vis, respectively. The infiltration of tracer molecules (Alexa Fluor 488) in multilayered quasi-mesoporous ZnO IOs was confirmed via confocal laser scanning microscopy, while fluorescence correlation spectroscopy analysis revealed two distinct diffusion times in IOs assigned to diffusion through the pores (fast) and adsorption on the pore walls (slow).Item Open Access Piezoelectric templates - new views on biomineralization and biomimetics(2016) Stitz, Nina; Eiben, Sabine; Atanasova, Petia; Domingo, Neus; Leineweber, Andreas; Burghard, Zaklina; Bill, JoachimBiomineralization in general is based on electrostatic interactions and molecular recognition of organic and inorganic phases. These principles of biomineralization have also been utilized and transferred to bio-inspired synthesis of functional materials during the past decades. Proteins involved in both, biomineralization and bio-inspired processes, are often piezoelectric due to their dipolar character hinting to the impact of a template’s piezoelectricity on mineralization processes. However, the piezoelectric contribution on the mineralization process and especially the interaction of organic and inorganic phases is hardly considered so far. We herein report the successful use of the intrinsic piezoelectric properties of tobacco mosaic virus (TMV) to synthesize piezoelectric ZnO. Such films show a two-fold increase of the piezoelectric coefficient up to 7.2 pm V−1 compared to films synthesized on non-piezoelectric templates. By utilizing the intrinsic piezoelectricity of a biotemplate, we thus established a novel synthesis pathway towards functional materials, which sheds light on the whole field of biomimetics. The obtained results are of even broader and general interest since they are providing a new, more comprehensive insight into the mechanisms involved into biomineralization in living nature.Item Open Access In situ ultra-small- and small-angle X-ray scattering study of ZnO nanoparticle formation and growth through chemical bath deposition in the presence of polyvinylpyrrolidone(2023) Abitaev, Karina; Atanasova, Petia; Bill, Joachim; Preisig, Natalie; Kuzmenko, Ivan; Ilavsky, Jan; Liu, Yun; Sottmann, ThomasZnO inverse opals combine the outstanding properties of the semiconductor ZnO with the high surface area of the open-porous framework, making them valuable photonic and catalysis support materials. One route to produce inverse opals is to mineralize the voids of close-packed polymer nanoparticle templates by chemical bath deposition (CBD) using a ZnO precursor solution, followed by template removal. To ensure synthesis control, the formation and growth of ZnO nanoparticles in a precursor solution containing the organic additive polyvinylpyrrolidone (PVP) was investigated by in situ ultra-small- and small-angle X-ray scattering (USAXS/SAXS). Before that, we studied the precursor solution by in-house SAXS at T = 25 °C, revealing the presence of a PVP network with semiflexible chain behavior. Heating the precursor solution to 58 °C or 63 °C initiates the formation of small ZnO nanoparticles that cluster together, as shown by complementary transmission electron microscopy images (TEM) taken after synthesis. The underlying kinetics of this process could be deciphered by quantitatively analyzing the USAXS/SAXS data considering the scattering contributions of particles, clusters, and the PVP network. A nearly quantitative description of both the nucleation and growth period could be achieved using the two-step Finke–Watzky model with slow, continuous nucleation followed by autocatalytic growth.Item Open Access A complementary experimental and theoretical approach for probing the surface functionalization of ZnO with molecular catalyst linkers(2023) Kousik, Shravan R.; Solodenko, Helena; YazdanYar, Azade; Kirchhof, Manuel; Schützendübe, Peter; Richter, Gunther; Laschat, Sabine; Fyta, Maria; Schmitz, Guido; Bill, Joachim; Atanasova, PetiaThe application of ZnO materials as solid-state supports for molecular heterogeneous catalysis is contingent on the functionalization of the ZnO surface with stable self-assembled monolayers (SAMs) of catalyst linker molecules. Herein, experimental and theoretical methods are used to study SAMs of azide-terminated molecular catalyst linkers with two different anchor groups (silane and thiol) on poly and monocrystalline (0001, ) ZnO surfaces. Angle-resolved and temperature-dependent X-ray photoelectron spectroscopy (XPS) is used to study SAM binding modes, thermal stabilities, and coverages. The binding strengths and atomistic ordering of the SAMs are determined via atom-probe tomography (APT). Density functional theory (DFT) and ab initio molecular dynamics (AIMD) calculations provide insights on the influence of the ZnO surface polarity on the interaction affinity and conformational behavior of the SAMs. The investigations show that SAMs based on 3-azidopropyltriethoxysilane possess a higher binding strength and thermal stability than the corresponding thiol. SAM surface coverage is strongly influenced by the surface polarity of ZnO, and the highest coverage is observed on the polycrystalline surface. To demonstrate the applicability of linker-modified polycrystalline ZnO as a catalyst support, a chiral Rh diene complex is immobilized on the azide-terminal of the SAM and its coverage is evaluated via XPS.Item Open Access Hierarchical silica inverse opals as a catalyst support for asymmetric molecular heterogeneous catalysis with chiral Rh‐diene complexes(2021) Deimling, Max; Kousik, Shravan R.; Abitaev, Karina; Frey, Wolfgang; Sottmann, Thomas; Koynov, Kaloian; Laschat, Sabine; Atanasova, PetiaThe efficacy of heterogeneous catalysis relies heavily on diffusion and distribution of reactants within catalyst supports. However, the presence of confinement, essential for reaction selectivity, drastically slows down molecular transport. Here, macro‐mesoporous silica inverse opal (SiO2-IO) films were used as a model system to study the rather unexplored molecular infiltration behavior using a probe molecule resembling a catalyst via confocal laser scanning microscopy (CLSM). CLSM analysis revealed homogeneous tracer distribution in SiO2-IO and attachment to both transport and mesopores. Bulk macro‐mesoporous SiO2-IO support was used for the attachment of mono‐ and bis‐functionalized chiral Rh‐diene complexes, and the catalytic activity and selectivity with respect to the support was studied. Lower enantioselectivity was observed with the bis‐functionalized ligand due to ligand entanglement and reduced accessibility of the active site, while the mono‐functionalized ligand gave an excellent enantioselectivity of 94 %ee in the asymmetric 1,2‐addition of triphenylboroxine to N‐tosylimines and could be recycled up to three times.