03 Fakultät Chemie
Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/4
Browse
47 results
Search Results
Item Open Access Molecular modeling of hydrophobic effects in complex biomolecular systems : from simple mixtures to protein-interface aggregation(2014) Benson, Sven P.; Pleiss, Jürgen (Prof. Dr.)Hydrophobicity is a term commonly used to discuss the formation of molecular structures in aqueous solution, and since water is ubiquitous in cellular systems, it may be applied in virtually every biomolecular context. Hydrophobicity is not a first-principle parameter but an abstract concept to describe the “behavior” of molecules in aqueous environments. The terminology of hydrophobicity is misleading, because it implies repulsion or a lack of attraction between nonpolar groups and water, when in fact attractive interactions persist due to atom dipoles. Although it has long been recognized that the driving force of structure formation in aqueous environments is founded in water’s “narcissism”, i.e., water self-preference, rather than in a general “fear of water”, the term hydrophobicity has established itself ever since Kautzmann related protein stability to hydrophobic interactions. Due to its false implications, hydrophobicity can be a cause of confusion and the culprit of misleading deductions. Presented in this dissertation is the author’s work on the structural and dynamical characterization of hydrophobic effects in biomolecular systems in the broadest sense, whereby molecular systems on three different size scales are covered: binary mixtures of methanol and water, aggregation of triglyceride droplets in aqueous solution and enzymes that interact with triglyceride-water interfaces of large-scale triglyceride aggregates.Item Open Access Eignung von metallorganischen Gerüstverbindungen als stationäre Phase in der Hochleistungsflüssigchromatographie (HPLC)(2017) Lieder, Christian; Klemm, Elias (Prof. Dr.-Ing.)Anwendung von metallorganischen Gerüstverbindungen als stationäre Phase in der HPLC, Vergleich mit klassischen Silika-Materialien. Synthese der metallorganischen Gerüstverbindungen, Modifizierung. Befüllung chromatographischer Säulen und Gegenüberstellung der Füllmethoden. Methodenentwicklung, Einflüsse auf chromatographische Ergebnisse. Chirale Erkennung, Untersuchung der Wechselwirkungen. Theoretisch chemische Berechnungen der Wechselwirkungen.Item Open Access Chitin/cellulose blend fibers prepared by wet and dry‐wet spinning(2020) Ota, Antje; Beyer, Ronald; Hageroth, Ulrich; Müller, Alexandra; Tomasic, Patricija; Hermanutz, Frank; Buchmeiser, Michael R.We describe the wet and dry‐wet spinning of multifilament cellulosic composite fibers, namely chitin/cellulose fibers. The direct solution process for the two biopolymers based on an ionic liquid as solvent represents an environmentally friendly and alternative technology to the industrially applied viscose and lyocell process. Both cellulose and chitin possess good solubility in 1‐ethyl‐3‐methylimidazolium propionate ([C2C1Im][OPr]) and were spun into multifilament composite fibers. Moreover, for the first time, pure chitin multifilament fibers were obtained by dry‐wet spinning. The effect of chitin addition on the filament properties was investigated and evaluated by microscopic, spectroscopic, and mechanical analyses.Item Open Access Reversible N‐heterocyclic carbene‐induced α‐H abstraction in Tungsten(VI) imido dialkyl dialkoxide complexes(2020) Musso, Janis V.; Benedikter, Mathis J.; Wang, Dongren; Frey, Wolfgang; Altmann, Hagen J.; Buchmeiser, Michael R.The first reversible N‐heterocyclic carbene (NHC) induced α‐H abstraction in tungsten(VI) imido‐dialkyl dialkoxide complexes is reported. Treatment of W(NAr)(CH2Ph)2(OtBu)2 (Ar=2,6‐dichlorophenyl, 2,6‐dimethylphenyl, 2,6‐diisopropylphenyl) with different NHCs leads to the formation of complexes of the type W(NAr)(CHPh)(NHC)(CH2Ph)(OtBu) in excellent isolated yields of up to 96 %. The highly unusual release of the tert‐butoxide ligand as tBuOH in the course of the reaction was observed. The formed alkylidene complexes and tBuOH are in an equilibrium with the NHC and the dialkyl complexes. Reaction kinetics were monitored by 1H NMR spectroscopy. A correlation between the steric and electronic properties of the NHC and the reaction rates was observed. Kinetics of a deuterium‐labeled complex in comparison to its non‐deuterated counterpart revealed the presence of a strong primary kinetic isotope effect (KIE) of 4.2, indicating that α‐H abstraction is the rate‐determining step (RDS) of the reaction.Item Open Access Engineering thermal stability and solvent tolerance of the soluble quinoprotein PedE from Pseudomonas putida KT2440 with a heterologous whole-cell screening approach(2018) Wehrmann, Matthias; Klebensberger, JanoschDue to their ability for direct electron transfer to electrodes, the utilization of rare earth metals as cofactor, and their periplasmic localization, pyrroloquinoline quinone‐dependent alcohol dehydrogenases (PQQ‐ADHs) represent an interesting class of biocatalysts for various biotechnological applications. For most biocatalysts protein stability is crucial, either to increase the performance of the protein under a given process condition or to maximize robustness of the protein towards mutational manipulations, which are often needed to enhance or introduce a functionality of interest. In this study, we describe a whole‐cell screening assay, suitable for probing PQQ‐ADH activities in Escherichia coli BL21(DE3) cells, and use this assay to screen smart mutant libraries for increased thermal stability of the PQQ‐ADH PedE (PP_2674) from Pseudomonas putida KT2440. Upon three consecutive rounds of screening, we identified three different amino acid positions, which significantly improve enzyme stability. The subsequent combination of the beneficial mutations finally results in the triple mutant R91D/E408P/N410K, which not only exhibits a 7°C increase in thermal stability but also a twofold increase in residual activity upon incubation with up to 50% dimethyl sulfoxide (DMSO), while showing no significant difference in enzymatic efficiency (kcat/KM).Item Open Access The Fermi energy as common parameter to describe charge compensation mechanisms : a path to Fermi level engineering of oxide electroceramics(2023) Klein, Andreas; Albe, Karsten; Bein, Nicole; Clemens, Oliver; Creutz, Kim Alexander; Erhart, Paul; Frericks, Markus; Ghorbani, Elaheh; Hofmann, Jan Philipp; Huang, Binxiang; Kaiser, Bernhard; Kolb, Ute; Koruza, Jurij; Kübel, Christian; Lohaus, Katharina N. S.; Rödel, Jürgen; Rohrer, Jochen; Rheinheimer, Wolfgang; De Souza, Roger A.; Streibel, Verena; Weidenkaff, Anke; Widenmeyer, Marc; Xu, Bai-Xiang; Zhang, HongbinChemical substitution, which can be iso- or heterovalent, is the primary strategy to tailor material properties. There are various ways how a material can react to substitution. Isovalent substitution changes the density of states while heterovalent substitution, i.e. doping, can induce electronic compensation, ionic compensation, valence changes of cations or anions, or result in the segregation or neutralization of the dopant. While all these can, in principle, occur simultaneously, it is often desirable to select a certain mechanism in order to determine material properties. Being able to predict and control the individual compensation mechanism should therefore be a key target of materials science. This contribution outlines the perspective that this could be achieved by taking the Fermi energy as a common descriptor for the different compensation mechanisms. This generalization becomes possible since the formation enthalpies of the defects involved in the various compensation mechanisms do all depend on the Fermi energy. In order to control material properties, it is then necessary to adjust the formation enthalpies and charge transition levels of the involved defects. Understanding how these depend on material composition will open up a new path for the design of materials by Fermi level engineering.Item Open Access Binder-free V2O5 cathode for high energy density rechargeable aluminum-ion batteries(2020) Diem, Achim M.; Fenk, Bernhard; Bill, Joachim; Burghard, ZaklinaNowadays, research on electrochemical storage systems moves into the direction of post-lithium-ion batteries, such as aluminum-ion batteries, and the exploration of suitable materials for such batteries. Vanadium pentoxide (V2O5) is one of the most promising host materials for the intercalation of multivalent ions. Here, we report on the fabrication of a binder-free and self-supporting V2O5 micrometer-thick paper-like electrode material and its use as the cathode for rechargeable aluminum-ion batteries. The electrical conductivity of the cathode was significantly improved by a novel in-situ and self-limiting copper migration approach into the V2O5 structure. This process takes advantage of the dissolution of Cu by the ionic liquid-based electrolyte, as well as the presence of two different accommodation sites in the nanostructured V2O5 available for aluminum-ions and the migrated Cu. Furthermore, the advanced nanostructured cathode delivered a specific discharge capacity of up to ~170 mAh g-1 and the reversible intercalation of Al3+ for more than 500 cycles with a high Coulomb efficiency reaching nearly 100%. The binder-free concept results in an energy density of 74 Wh kg-1, which shows improved energy density in comparison to the so far published V2O5-based cathodes. Our results provide valuable insights for the future design and development of novel binder-free and self-supporting electrodes for rechargeable multivalent metal-ion batteries associating a high energy density, cycling stability, safety and low cost.Item Open Access Magnetic tilting in nematic liquid crystals driven by self‐assembly(2021) Hähsler, Martin; Nádasi, Hajnalka; Feneberg, Martin; Marino, Sebastian; Giesselmann, Frank; Behrens, Silke; Eremin, AlexeySelf‐assembly is one of the crucial mechanisms allowing the design multifunctional materials. Soft hybrid materials contain components of different natures and exhibit competitive interactions which drive self‐organization into structures of a particular function. Here a novel type of a magnetic hybrid material where the molecular tilt can be manipulated through a delicate balance between the topologically‐assisted colloidal self‐assembly of magnetic nanoparticles and the anisotropic molecular interactions in a liquid crystal matrix is demonstrated.Item Open Access Asymmetric Rh diene catalysis under confinement : isoxazole ring‐contraction in mesoporous solids(2024) Marshall, Max; Dilruba, Zarfishan; Beurer, Ann‐Katrin; Bieck, Kira; Emmerling, Sebastian; Markus, Felix; Vogler, Charlotte; Ziegler, Felix; Fuhrer, Marina; Liu, Sherri S. Y.; Kousik, Shravan R.; Frey, Wolfgang; Traa, Yvonne; Bruckner, Johanna R.; Plietker, Bernd; Buchmeiser, Michael R.; Ludwigs, Sabine; Naumann, Stefan; Atanasova, Petia; Lotsch, Bettina V.; Zens, Anna; Laschat, SabineCovalent immobilization of chiral dienes in mesoporous solids for asymmetric heterogeneous catalysis is highly attractive. In order to study confinement effects in bimolecular vs monomolecular reactions, a series of pseudo‐C2‐symmetrical tetrahydropentalenes was synthesized and immobilized via click reaction on different mesoporous solids (silica, carbon, covalent organic frameworks) and compared with homogeneous conditions. Two types of Rh‐catalyzed reactions were studied: (a) bimolecular nucleophilic 1,2‐additions of phenylboroxine to N‐tosylimine and (b) monomolecular isomerization of isoxazole to 2H‐azirne. Polar support materials performed better than non‐polar ones. Under confinement, bimolecular reactions showed decreased yields, whereas yields in monomolecular reactions were only little affected. Regarding enantioselectivity the opposite trend was observed, i. e. effective enantiocontrol for bimolecular reactions but only little control for monomolecular reactions was found.Item Open Access Herstellung von Acrylnitril aus biobasierter Milchsäure und Propionsäure(2019) Mack, Daniel; Klemm, Elias (Prof. Dr.-Ing.)