10 Fakultät Wirtschafts- und Sozialwissenschaften

Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/11

Browse

Search Results

Now showing 1 - 6 of 6
  • Thumbnail Image
    ItemOpen Access
    Cross-bridge mechanics estimated from skeletal muscles’ work-loop responses to impacts in legged locomotion
    (2021) Christensen, Kasper B.; Günther, Michael; Schmitt, Syn; Siebert, Tobias
    Legged locomotion has evolved as the most common form of terrestrial locomotion. When the leg makes contact with a solid surface, muscles absorb some of the shock-wave accelerations (impacts) that propagate through the body. We built a custom-made frame to which we fixated a rat (Rattus norvegicus, Wistar) muscle (m. gastrocnemius medialis and lateralis: GAS) for emulating an impact. We found that the fibre material of the muscle dissipates between 3.5 and 23μJ ranging from fresh, fully active to passive muscle material, respectively. Accordingly, the corresponding dissipated energy in a half-sarcomere ranges between 10.4 and 68zJ, respectively. At maximum activity, a single cross-bridge would, thus, dissipate 0.6% of the mechanical work available per ATP split per impact, and up to 16% energy in common, submaximal, activities. We also found the cross-bridge stiffness as low as 2.2pNnm-1, which can be explained by the Coulomb-actuating cross-bridge part dominating the sarcomere stiffness. Results of the study provide a deeper understanding of contractile dynamics during early ground contact in bouncy gait.
  • Thumbnail Image
    ItemOpen Access
    Active exoskeleton reduces erector spinae muscle activity during lifting
    (2023) Walter, Tobias; Stutzig, Norman; Siebert, Tobias
    Musculoskeletal disorders (MSD) are a widespread problem, often regarding the lumbar region. Exoskeletons designed to support the lower back could be used in physically demanding professions with the intention of reducing the strain on the musculoskeletal system, e.g., by lowering task-related muscle activation. The present study aims to investigate the effect of an active exoskeleton on back muscle activity when lifting weights. Within the framework of the study, 14 subjects were asked to lift a 15 kg box with and without an active exoskeleton which allows the adjustment of different levels of support, while the activity of their M. erector spinae (MES) was measured using surface electromyography. Additionally, the subjects were asked about their overall rating of perceived exertion (RPE) during lifting under various conditions. Using the exoskeleton with the maximum level of support, the muscle activity was significantly lower than without exoskeleton. A significant correlation was found between the exoskeleton’s support level and the reduction of MES activity. The higher the support level, the lower the observed muscle activity. Furthermore, when lifting with the maximum level of support, RPE was found to be significantly lower than without exoskeleton too. A reduction in the MES activity indicates actual support for the movement task and might indicate lower compression forces in the lumbar region. It is concluded that the active exoskeleton supports people noticeably when lifting heavy weights. Exoskeletons seem to be a powerful tool for reducing load during physically demanding jobs and thus, their use might be helpful in lowering the risk of MSD.
  • Thumbnail Image
    ItemOpen Access
    Power amplification increases with contraction velocity during stretch-shortening cycles of skinned muscle fibers
    (2021) Tomalka, André; Weidner, Sven; Hahn, Daniel; Seiberl, Wolfgang; Siebert, Tobias
    Muscle force, work, and power output during concentric contractions (active muscle shortening) are increased immediately following an eccentric contraction (active muscle lengthening). This increase in performance is known as the stretch-shortening cycle (SSC)-effect. Recent findings demonstrate that the SSC-effect is present in the sarcomere itself. More recently, it has been suggested that cross-bridge (XB) kinetics and non-cross-bridge (non-XB) structures (e.g., titin and nebulin) contribute to the SSC-effect. As XBs and non-XB structures are characterized by a velocity dependence, we investigated the impact of stretch-shortening velocity on the SSC-effect. Accordingly, we performed in vitro isovelocity ramp experiments with varying ramp velocities (30, 60, and 85% of maximum contraction velocity for both stretch and shortening) and constant stretch-shortening magnitudes (17% of the optimum sarcomere length) using single skinned fibers of rat soleus muscles. The different contributions of XB and non-XB structures to force production were identified using the XB-inhibitor Blebbistatin. We show that (i) the SSC-effect is velocity-dependent - since the power output increases with increasing SSC-velocity. (ii) The energy recovery (ratio of elastic energy storage and release in the SSC) is higher in the Blebbistatin condition compared with the control condition. The stored and released energy in the Blebbistatin condition can be explained by the viscoelastic properties of the non-XB structure titin. Consequently, our experimental findings suggest that the energy stored in titin during the eccentric phase contributes to the SSC-effect in a velocity-dependent manner.
  • Thumbnail Image
    ItemOpen Access
    Muscle wobbling mass dynamics : eigenfrequency dependencies on activity, impact strength, and ground material
    (2023) Christensen, Kasper B.; Günther, Michael; Schmitt, Syn; Siebert, Tobias
    In legged locomotion, muscles undergo damped oscillations in response to the leg contacting the ground (an impact). How muscle oscillates varies depending on the impact situation. We used a custom-made frame in which we clamped an isolated rat muscle ( M. gastrocnemius medialis and lateralis : GAS) and dropped it from three different heights and onto two different ground materials. In fully activated GAS, the dominant eigenfrequencies were 163 Hz, 265 Hz, and 399 Hz, which were signficantly higher (p < 0.05) compared to the dominant eigenfrequencies in passive GAS: 139 Hz, 215 Hz, and 286 Hz. In general, neither changing the falling height nor ground material led to any significant eigenfrequency changes in active nor passive GAS, respectively. To trace the eigenfrequency values back to GAS stiffness values, we developed a 3DoF model. The model-predicted GAS muscle eigenfrequencies matched well with the experimental values and deviated by - 3.8%, 9.0%, and 4.3% from the passive GAS eigenfrequencies and by - 1.8%, 13.3%, and - 1.5% from the active GAS eigenfrequencies. Differences between the frequencies found for active and passive muscle impact situations are dominantly due to the attachment of myosin heads to actin.
  • Thumbnail Image
    ItemOpen Access
    Efficacy of personalized feedback in encouraging sustainable washing behavior : evidence from a pilot study in Germany
    (2025) Höpfl, Laura; Đula, Ivan; Kiss, Francisco; Walter, Rebecca; Wirzberger, Maria
    Introduction: Reducing household energy consumption through behavioral changes is a key strategy in addressing the emissions driving the climate crisis. Behavioral changes in affluent households toward more sustainable practices can have a significant positive impact. Prior research highlighted the role of individual values and motivational factors in shaping sustainable clusters. A more personalized approach toward encouraging the resulting clusters of people to adopt more sustainable strategies seems promising. Such an approach could incorporate aligned feedback, which has been proven to be a powerful mechanism throughout learning processes.
    Method: Over 9 weeks, a pilot study with 50 participants investigated the impact of different types of feedback on washing behavior. The within-subjects design included (1) a baseline condition, (2) feedback on energy consumption (kWh), and (3) feedback on monetary costs per cycle (EUR). Data collection encompassed pre- and post-condition surveys, a final comprehensive survey, and a diary-formatted table. The primary objective was to evaluate the potential for individualization. Asynchronous structured interviews were conducted at the end to explore participants' perceptions and washing behaviors.
    Results: While we found effects for the feedback manipulation, we found no differences between user clusters in individual washing behaviors. Furthermore, participants qualitatively reported habitual changes, feeling more knowledgeable about the monetary impacts of specific washing programs and temperatures, and wished for a more accessible preset time function. Most participants expressed willingness to switch to a dynamic energy price if it translated to significant cost savings.
    Discussion: Our findings may support the notion that individualized behavior change strategies are promising. In general, these strategies should be easily applicable, cost-effective, and promote habits to be exerted regularly. Arising methodological limitations suggest further research in this domain. From an applied perspective, our research provides valuable insights for designing products, services, and regulations by governments and companies, empowering them to develop more effective strategies for reducing energy consumption.
  • Thumbnail Image
    ItemOpen Access
    Impact of lengthening velocity on the generation of eccentric force by slow-twitch muscle fibers in long stretches
    (2024) Weidner, Sven; Tomalka, André; Rode, Christian; Siebert, Tobias
    After an initial increase, isovelocity elongation of a muscle fiber can lead to diminishing (referred to as Give in the literature) and subsequently increasing force. How the stretch velocity affects this behavior in slow-twitch fibers remains largely unexplored. Here, we stretched fully activated individual rat soleus muscle fibers from 0.85 to 1.3 optimal fiber length at stretch velocities of 0.01, 0.1, and 1 maximum shortening velocity, vmax, and compared the results with those of rat EDL fast-twitch fibers obtained in similar experimental conditions. In soleus muscle fibers, Give was 7%, 18%, and 44% of maximum isometric force for 0.01, 0.1, and 1 vmax, respectively. As in EDL fibers, the force increased nearly linearly in the second half of the stretch, although the number of crossbridges decreased, and its slope increased with stretch velocity. Our findings are consistent with the concept of a forceful detachment and subsequent crossbridge reattachment in the stretch’s first phase and a strong viscoelastic titin contribution to fiber force in the second phase of the stretch. Interestingly, we found interaction effects of stretch velocity and fiber type on force parameters in both stretch phases, hinting at fiber type-specific differences in crossbridge and titin contributions to eccentric force. Whether fiber type-specific combined XB and non-XB models can explain these effects or if they hint at some not fully understood properties of muscle contraction remains to be shown. These results may stimulate new optimization perspectives in sports training and provide a better understanding of structure-function relations of muscle proteins.