10 Fakultät Wirtschafts- und Sozialwissenschaften

Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/11

Browse

Search Results

Now showing 1 - 6 of 6
  • Thumbnail Image
    ItemOpen Access
    The effect of multidirectional loading on contractions of the M. medial gastrocnemius
    (2021) Ryan, David S.; Stutzig, Norman; Helmer, Andreas; Siebert, Tobias; Wakeling, James M.
    Research has shown that compression of muscle can lead to a change in muscle force. Most studies show compression to lead to a reduction in muscle force, although recent research has shown that increases are also possible. Based on methodological differences in the loading design between studies, it seems that muscle length and the direction of transverse loading influence the effect of muscle compression on force production. Thus, in our current study we implement these two factors to influence the effects of muscle loading. In contrast to long resting length of the medial gastrocnemius (MG) in most studies, we use a shorter MG resting length by having participant seated with their knees at a 90° angle. Where previous studies have used unidirectional loads to compress the MG, in this study we applied a multidirectional load using a sling setup. Multidirectional loading using a sling setup has been shown to cause muscle force reductions in previous research. As a result of our choices in experimental design we observed changes in the effects of muscle loading compared to previous research. In the present study we observed no changes in muscle force due to muscle loading. Muscle thickness and pennation angle showed minor but significant increases during contraction. However, no significant changes occurred between unloaded and loaded trials. Fascicle thickness and length showed different patterns of change compared to previous research. We show that muscle loading does not result in force reduction in all situations and is possibly linked to differences in muscle architecture and muscle length.
  • Thumbnail Image
    ItemOpen Access
    Cross-bridge mechanics estimated from skeletal muscles’ work-loop responses to impacts in legged locomotion
    (2021) Christensen, Kasper B.; Günther, Michael; Schmitt, Syn; Siebert, Tobias
    Legged locomotion has evolved as the most common form of terrestrial locomotion. When the leg makes contact with a solid surface, muscles absorb some of the shock-wave accelerations (impacts) that propagate through the body. We built a custom-made frame to which we fixated a rat (Rattus norvegicus, Wistar) muscle (m. gastrocnemius medialis and lateralis: GAS) for emulating an impact. We found that the fibre material of the muscle dissipates between 3.5 and 23μJ ranging from fresh, fully active to passive muscle material, respectively. Accordingly, the corresponding dissipated energy in a half-sarcomere ranges between 10.4 and 68zJ, respectively. At maximum activity, a single cross-bridge would, thus, dissipate 0.6% of the mechanical work available per ATP split per impact, and up to 16% energy in common, submaximal, activities. We also found the cross-bridge stiffness as low as 2.2pNnm-1, which can be explained by the Coulomb-actuating cross-bridge part dominating the sarcomere stiffness. Results of the study provide a deeper understanding of contractile dynamics during early ground contact in bouncy gait.
  • Thumbnail Image
    ItemOpen Access
    Impact of multidirectional transverse calf muscle loading on calf muscle force in young adults
    (2018) Siebert, Tobias; Eb, Manuel; Ryan, David S.; Wakeling, James M.; Stutzig, Norman
    It has been demonstrated that unidirectional transversal muscle loading induced by a plunger influences muscle shape and reduces muscle force. The interaction between muscle and transversal forces may depend on specific neuromuscular properties that change during a lifetime. Compression garments, applying forces from all directions in the transverse plane, are widely used in sports for example to improve performance. Differences in the loading direction (unidirectional vs. multidirectional) may have an impact on force generating capacity of muscle and, thus, on muscle performance. The aim of this study was to examine the effect of multidirectional transversal loads, using a sling looped around the calf, on the isometric force during plantarflexions. Young male adults (25.7 ± 1.5 years, n = 15) were placed in a prone position in a calf press apparatus. The posterior tibial nerve was stimulated to obtain the maximal double-twitch force of the calf muscles with (59.4 N and 108.4 N) and without multidirectional transverse load. Compared to the unloaded condition, the rate of force development was reduced by 5.0±8.1 % (p=0.048) and 6.9±10.7 % (p=0.008) for the 59.4 N and the 108.4 N load, respectively. No significant reduction (3.2±4.8 %, p=0.141) in maximum muscle force (Fm) was found for the lower load (59.4 N), but application of the higher load (108.4 N) resulted in a significant reduction of Fm by 4.8±7.0 % (p=0.008). Mean pressures induced in this study (14.3 mm Hg and 26.3 mm Hg corresponding to the 59.4 N and 108.4 N loads, respectively) are within the pressure range reported for compression garments. Taking the results of the present study into account, a reduction in maximum muscle force would be expected for compression garments with pressures ≥ 26.3 mm Hg. However, it should be noted that the loading condition (sling vs. compression garment) differs and that compression garments may influence other mechanisms contributing to force generation. For example, wearing compression garments may enhance sport performance by enhanced proprioception and reduced muscle oscillation. Thus, superposition of several effects should be considered when analyzing the impact of compression garments on more complex sport performance.
  • Thumbnail Image
    ItemOpen Access
    Reference measures of lower-limb joint range of motion, muscle strength, and selective voluntary motor control of typically developing children aged 5-17 years
    (2024) Scherff, Emily; Schnell, Sabrina Elisabeth; Siebert, Tobias; D’Souza, Sonia
    Background: Joint range of motion based on the neutral null method, muscle strength based on manual muscle testing, and selective voluntary motor control based on selective control assessment of the lower extremity are standard parameters of a pediatric three-dimensional clinical gait analysis. Lower-limb reference data of children are necessary to identify and quantify abnormalities, but these are limited and when present restricted to specific joints or muscles. Methods: This is the first study that encompasses the aforementioned parameters from a single group of 34 typically developing children aged 5–17 years. Left and right values were averaged for each participant, and then the mean and standard deviation calculated for the entire sample. The data set was tested for statistical significance ( p  < 0.05). Results: Joint angle reference values are mostly consistent with previously published standards, although there is a large variability in the existing literature. All muscle strength distributions, except for M. quadriceps femoris, differ significantly from the maximum value of 5. The mean number of repetitions of heel-rise test is 12 ± 5. Selective voluntary motor control shows that all distributions, except for M. quadriceps femoris, differ significantly from the maximum value of 2. Conclusion: Since typically developing children do not match expectations and reference values from the available literature and clinical use, this study emphasizes the importance of normative data. Excessively high expectations lead to typically developing children being falsely underestimated and affected children being rated too low. This is of great relevance for therapists and clinicians. Level of evidence: 3.
  • Thumbnail Image
    ItemOpen Access
    On a three-dimensional model for the description of the passive characteristics of skeletal muscle tissue
    (2022) Walter, Fabian; Seydewitz, Robert; Mitterbach, Philipp; Siebert, Tobias; Böl, Markus
    In this work, a three-dimensional model was developed to describe the passive mechanical behaviour of anisotropic skeletal muscle tissue. To validate the model, orientation-dependent axial ( 0∘, 45∘, 90∘) and semi-confined compression experiments (mode I, II, III) were performed on soleus muscle tissue from rabbits. In the latter experiments, specimen deformation is prescribed in the loading direction and prevented in an additional spatial direction, fibre compression at 0∘(mode I), fibre elongation at 90∘(mode II) and a neutral state of the fibres at 90∘where their length is kept constant (mode III). Overall, the model can adequately describe the mechanical behaviour with a relatively small number of model parameters. The stiffest tissue response during orientation-dependent axial compression ( -7.7±1.3 kPa) occurs when the fibres are oriented perpendicular to the loading direction ( 90∘) and are thus stretched during loading. Semi-confined compression experiments yielded the stiffest tissue ( -36.7±11.2 kPa) in mode II when the muscle fibres are stretched. The extensive data set collected in this study allows to study the different error measures depending on the deformation state or the combination of deformation states.
  • Thumbnail Image
    ItemOpen Access
    Impact of lengthening velocity on the generation of eccentric force by slow-twitch muscle fibers in long stretches
    (2024) Weidner, Sven; Tomalka, André; Rode, Christian; Siebert, Tobias
    After an initial increase, isovelocity elongation of a muscle fiber can lead to diminishing (referred to as Give in the literature) and subsequently increasing force. How the stretch velocity affects this behavior in slow-twitch fibers remains largely unexplored. Here, we stretched fully activated individual rat soleus muscle fibers from 0.85 to 1.3 optimal fiber length at stretch velocities of 0.01, 0.1, and 1 maximum shortening velocity, vmax, and compared the results with those of rat EDL fast-twitch fibers obtained in similar experimental conditions. In soleus muscle fibers, Give was 7%, 18%, and 44% of maximum isometric force for 0.01, 0.1, and 1 vmax, respectively. As in EDL fibers, the force increased nearly linearly in the second half of the stretch, although the number of crossbridges decreased, and its slope increased with stretch velocity. Our findings are consistent with the concept of a forceful detachment and subsequent crossbridge reattachment in the stretch’s first phase and a strong viscoelastic titin contribution to fiber force in the second phase of the stretch. Interestingly, we found interaction effects of stretch velocity and fiber type on force parameters in both stretch phases, hinting at fiber type-specific differences in crossbridge and titin contributions to eccentric force. Whether fiber type-specific combined XB and non-XB models can explain these effects or if they hint at some not fully understood properties of muscle contraction remains to be shown. These results may stimulate new optimization perspectives in sports training and provide a better understanding of structure-function relations of muscle proteins.