15 Fakultätsübergreifend / Sonstige Einrichtung
Permanent URI for this collectionhttps://elib.uni-stuttgart.de/handle/11682/16
Browse
Item Open Access 1.3 μm monolithic integrated optoelectronic receiver using InGaAs MSM photodiode and AlGaAs/GaAs HEMTs grown on GaAs(1994) Hurm, Volker; Benz, Willi; Berroth, Manfred; Fink, Thomas; Fritzsche, Daniel; Haupt, Michael; Hofmann, Peter; Köhler, Klaus; Ludwig, Manfred; Mause, Klaus; Raynor, Brian; Rosenzweig, JosefThe first 1.3 μm monolithic integrated optoelectronic receiver using an InGaAs MSM photodiode and AlGaAs/GaAs HEMTs grown on a GaAs substrate has been fabricated. At each differential output the transimpedance is 26.8 kΩ. The bandwidth of 430 MHz implies suitability for transmission rates up to 622 Mbit/s.Item Open Access 10 Gbit/s monolithic integrated Msm-photodiode AlGaAs/GaAs-HEMT optoelectronic receiver(1991) Hurm, Volker; Rosenzweig, Josef; Ludwig, Manfred; Benz, Willi; Osorio, Ricardo; Berroth, Manfred; Hülsmann, Axel; Kaufel, Gudrun; Köhler, Klaus; Raynor, Brian; Schneider, Joachim-Item Open Access 10-20 Gbit/s GaAs/AlGaAs HEMT ICs for high speed data links(1992) Berroth, Manfred; Hurm, Volker; Lang, Manfred; Ludwig, Manfred; Nowotny, Ulrich; Wang, Zhigong; Wennekers, Peter; Hülsmann, Axel; Kaufel, Gudrun; Köhler, Klaus; Raynor, Brian; Schneider, JoachimA set of ICs has been developed for high-speed data links at data rates above 10 Gbit/s. A recessed gate process for double pulse doped quantum well transistors has been used with e-beam written 0.3- μm gates. A 4 bit multiplexer and a laser diode driver for the transmitter as well as a transimpedance amplifier, bit synchronizer, and 4 bit demultiplexer for the receiver have been successfully operated with data rates up to 20 Gbit/s.Item Open Access 15N and 13C spin lattice relaxation in neat liquids at high magnetic fields(1975) Schweitzer, Dieter; Spiess, Hans WolfgangGeneral features of 15N spin lattice relaxation in nitrobenzene, pyridine and triethanolamine are discussed and compared with l3C relaxation mechanisms.Item Open Access 19 GHz monolithic integrated clock recovery using PLL and 0.3 μm gate-length quantum-well HEMTs(1994) Wang, Zhigong; Berroth, Manfred; Seibel, Jörg; Hofmann, Peter; Hülsmann, Axel; Köhler, Klaus; Raynor, Brian; Schneider, JoachimICs for optical data links have been developed for bit rates between 10 and 200 Gb/s. The only exception was the clock recovery (CR) IC at these high bit rates. In fact, the IC realization of CR is generally accepted as the weak point of high-speed system integration. While the bit rates of some ICs reach up to 40 Gb/s, monolithic ICs for a full CR function are limited to 2.5 Gb/s. The monolithic IC described here, for CR with a PLL including a full-balanced VCO, is based on the IC reported by Wang et. al. (1993). Clock frequencies up to 19 GHz are recovered with the IC reported here.Item Open Access 20 Gb/s monolithic integrated clock recovery and data decision(1994) Wang, Zhigong; Berroth, Manfred; Hurm, Volker; Lang, Manfred; Hofmann, Peter; Hülsmann, Axel; Köhler, Klaus; Raynor, Brian; Schneider, JoachimAn IC for 20 Gb/s clock recovery and data decision was realised using 0.3 m gate-length QW-HEMTs. A narrow-band regenerative frequency divider with on-chip resonator filters is used for the clock recovery. The parallel processing concept is accepted for the data decision. The complex IC was tested on wafer using 5 and 10-Gb/s input data. The desired 10-GHz clock signal and regenerated data signals have been obtained. The 2x2 mm 2 IC has a power consumption of about 0.5 W at -3 volt supply voltage.Item Open Access 7.5 Gb/s monolithically integrated clock recovery using PLL and 0.3 μM gate length quantum well HEMTs(1993) Wang, Zhigong; Berroth, Manfred; Nowotny, Ulrich; Hofmann, Peter; Hülsmann, Axel; Köhler, Klaus; Raynor, Brian; Schneider, JoachimA monolithically integrated clock recovery (CR) circuit making use of the phase-locked loop (PLL) circuit technique and enhancement/depletion AlGaAs/GaAs quantum well high electron mobility transistors (QW-HEMTs) with gate lengths of 0.3 μm has been realized. A novel preprocessing circuit was used. In the PLL a fully-balanced varactorless VCO has been introduced. The VCO has a centre oscillating frequency of about 7.5 GHz and a tuning range greater than 500 MHz. A satisfactory clock signal has been obtained at the bit rate of about 7.5 Gb/s. The power consumption is less than 200 mW at the supply voltage of -5 V.Item Open Access Abbildung von Frames auf neuere Datenmodelle(1987) Härder, Theo; Mattos, Nelson Mendonca; Mitschang, BernhardEs wird die Abbildung von Frames mit ihren Modellierungskonzepten und charakteristischen Operationen auf objektorientierte Datenmodelle untersucht, um Wissensrepräsentation in sogenannten Non-Standard-Datenbanksystemen - beispielsweise für Expertensystem-Anwendungen - unterstützen zu können. Nach einem Vergleich der Eigenschaften von Relationenmodell, NF 2-Modell und MAD-Modell für diese Aufgabe wird eine Bewertung der verschiedenen Ansätze vorgenommen, um ihre Tauglichkeit für die Frame-Modellierung deutlicher herauszukristallisieren.Item Unknown Abtragung von Knorpel- und Knochengewebe mittels fasergeführtem Excimerlaserstrahl(1992) Neu, Walter; Dressel, Martin; Jahn, Renate; Grzesik, UlrichBei der Ablation von Gewebe mit kurzgepulsten Excimerlasern erfolgt die Materialabtragung nicht mehr ausschließlich durch photothermische Wirkung, sondern indem auch molekulare Bindungen aufgrund der hohen Photonenenergie des Lasers aufgebrochen werden. Die entstehenden gasförmigen Ablationsprodukte und Materialtrümmer werden dabei explosionsartig aus dem Bestrahlungsvolumen herausgeschleudert. Bei diesem Abtragungsmechanismus treten nur sehr geringe thermische Nebenwirkungen auf, da die Laserwellenlänge stark absorbiert, damit verbunden nur eine geringe Eindringtiefe erreicht wird und zusätzlich die Bestrahlungsdauer aufgrund des kurzen Laserpulses im Vergleich zu thermischen Diffusionszeiten klein ist.Item Open Access Ada compiler validation(1986) Plödereder, ErhardThis paper discusses Ada Compiler Validation from the viewpoint of both the compiler supplier and the compiler user. The objectives of the requirement for validation and the resulting benefits, as well as the limitations of validation are presented. The process of Ada compiler validation is detailed along with the various problems as well as issues relating to validation and the use of validated compilers. Solutions to these problems and issues are explained, as they are proposed in a recent AJPO draft of a revised validation policy.Item Open Access An adaptive data processing technique for lidar-assisted control to bridge the gap between lidar systems and wind turbines(2015) Schlipf, David; Fleming, Paul; Raach, Steffen; Scholbrock, Andrew; Haizmann, Florian; Krishnamurthy, Raghu; Boquet, Matthieu; Cheng, Po WenThis paper presents first steps toward an adaptive lidar data processing technique crucial for lidar-assisted control in wind turbines. The prediction time and the quality of the wind preview from lidar measurements depend on several factors and are not constant. If the data processing is not continually adjusted, the benefit of lidar-assisted control cannot be fully exploited or can even result in harmful control action. An online analysis of the lidar and turbine data is necessary to continually reassess the prediction time and lidar data quality. In this work, a structured process to develop an analysis tool for the prediction time and a new hardware setup for lidar-assisted control are presented. The tool consists of an online estimation of the rotor effective wind speed from lidar and turbine data and the implementation of an online cross-correlation to determine the time shift between both signals. Further, we present initial results from an ongoing campaign in which this system was employed for providing lidar preview for feedforward pitch control.Item Open Access Air bubble screens as a tool for water quality control(1976) Kobus, HelmutThe flow field induced by the release of compressed air in a water body has been studied analytically and experimentally. The quantitative knowledge of the flow pattern in standing water and in a cross flow serves as a basis for the design of air bubble installations, which can be used advantageously for a number of purposes in water quality control, such as pneumatic oil barriers, barriers against density currents due to differences in salinity, silt or sediment concentration or temperature, installations for combating the formation of ice, artificial destratification devices or installations for oxygenation purposes.Item Open Access Analysis of hydrogen Rydberg spectra in a uniform magnetic field: uncovering the transition from regularity to irregularity in a real quantum system(1986) Wunner, Günter; Woelk, Ulrich; Zech, Ingrid; Zeller, Gudrun; Ertl, Thomas; Geyer, Florian; Steitz, Arno; Schweizer, Wolfgang; Ruder, HannsStudies of the behaviour of quantum systems in a range of energy where their classical counterparts undergo transitions from regularity to irregularity, as manifested in phase space by the gradual destruction of invariant tori, to date have largely been confined to model Hamiltonian systems such as harmonic oscillators with cubic, quartic, or higher-degree polynomial corrections, or the stadium problem. We show that phenomena which have turned out characteristic of the onset of "quantum stochasticity" in these model systems can in fact be recovered in the quantal energy spectra of a "real" physical system, viz. spectra of hydrogen Rydberg atoms in strong magnetic fields. This implies that one has a simple prototype system at hand in which to study - not only in theory but also in experiment, quantitatively and in detail, and as a function of a continuously tunable external parameter - phenomena that are expected to be typical of the quantum properties of nonintegrable systems in general.Item Open Access Analysis of the flow induced by air-bubble systems(1968) Kobus, HelmutThe pattern of vertical velocities induced by an orifice discharging air into water can be represented by Gaussian distribution curves with a linear spread in the vertical except for the regions near the orifice and close to the free surface. An analytical treatment considering the momentum-flux increase due to the buoyancy of the air together with experimental information about the spread of the velocity profiles and the mean rising speed of the air bubble stream, which has been obtained from velocity and density measurements over a wide range of conditions, leads to a complete description of the flow field. The ratio of the water volume flux to the air discharge rate, which has been proposed as an efficiency criterion, is now at hand as a function of depth and air supply for both single orifices and rows. The experimental evidence supports the analysis well and suggests that extrapolation to larger water depths and air supplies should be permissible, which would allow approximate predictions of the volume flux for any air-bubble system.Item Open Access Analytical model for deformed bar bond under generalized excitations(1981) Ciampi, Vincenzo; Eligehausen, Rolf; Bertero, Vitelmo V.; Popov, Egor P.Ein mathematisches Modell zur Berechnung des Verhaltens eines Rippenstabes, verankert in eng verbügeltem Beton und beansprucht durch beliebige zyklische Belastungen hoher Intensität wird erläutert. Es umfasst die Formulierung eines vereinfachten Modells für die Beziehung zwischen örtlicher Verbundspannung und örtlichem Schlupf, das aus umfangreichen, in Berkeley durchgeführten Versuchen abgeleitet wurde; die Benutzung eines einfachen, jedoch ausreichend genauen Modells für das Spannungs-Dehnungs Gesetz des Bewehrungsstahles und die numerische Lösung der Differentialgleichung des Verbundes. Ein Beispiel ist dargestellt und erläutert.Item Open Access Andere Primärenergiequellen(1974) Voß, Alfred; Bundschuh, Vinzenz; Meliß, Michael; Oesterwind, DieterEs sollen im folgenden die Bedeutung der Geothermie, der Gezeiten-, Wind-, Wellen- und Gletscher- sowie der Meereswärme für die zukünftige Energieversorgung näher untersucht werden. Gemäß dem Stand des Wissens können dabei nur erste vorläufige Aussagen und Abschätzungen gemacht werden.Item Open Access Ein Ansatz zu graphischen Datenbanken und deren Verwendung in CAD-Systemen(1986) Hübel, Christoph; Mitschang, BernhardDie zentrale Aufgabe eines CAD-Systems ist die adäquate Unterstützung des Konstruktionsvorganges. Dazu müssen die Entwurfsobjekte sowohl graphisch repräsentiert als auch in einer sog. rechnerinternen Darstellung verwaltet werden. Heutzutage stehen für diese Aufgaben GKS-orientierte Graphiksysteme sowie Datenbanksysteme mit hierarchischer, netzwerkartiger bzw. relationaler Schnittstelle zur Verfügung. Am Beispiel des KUNICAD-Systems (ein datenbankbasierter 3D-Bauteilmodellierer) werden die Schnittstellen zwischen Graphik-, Anwendungs- und Datenhaltungskomponente aufgezeigt und analysiert. Dabei wird die Wichtigkeit der Kopplung von Graphik- und Datenhaltungskomponente erkannt. Als unmittelbare Konsequenz daraus wird die Integration von Graphik- und DB-System zu einem Gesamtsystem, dem Graphischen Datenbanksystem, vorgeschlagen sowie dessen Architekturmerkmale und charakteristischen Eigenschaften vorgestellt.Item Open Access Anspruch und Wirklichkeit von Energiemodellen(1980) Voß, AlfredIm folgenden wird der Versuch einer kritischen Analyse des gegenwärtigen Standes der Energiemodellentwicklung unternommen und zwar aus der Sicht eines an der Entwicklung und Anwendung von Energiemodellen direkt Beteiligten. Die Im folgenden gemachten Ausführungen sind deshalb weniger als eine umfassende und objektive Darstellung der Probleme im Bereich der Energiemodellentwicklung und -anwendung zu verstehen, als eine zugegebenermaßen subjektive, aber kritische Selbstreflexion des bisher Erreichten und Nichterreichten. Hier soll deutlich gemacht werden, daß die zentrale Herausforderung an die Energiemodelle in der nächsten Zukunft darin besteht, den Nachweis zu erbringen, daß sie konkrete Antworten auf einen Teil der dringenden Fragen und Probleme im Bereich der Energiepolitik geben können. In diesem Zusammenhang scheinen zwei Punkte von besonderer Bedeutung: 1. Wie können die bisher verfügbaren Energiemodelle benutzt werden, um angesichts der großen Unsicherheiten und unterschiedlichen Vorstellungen über die zukünftlge Struktur der Energieversorgung zur Formulierung einer tragfähigen Energiestrategie beizutragen? 2. Welche Maßnahmen sind zu ergreifen, damit die Ergebnisse von Modellanalysen auch in den Entscheidungsprozeß einfließen, d.h. von den Entscheidungsträgern in Wirtschaft und Politik genutzt werden?Item Open Access Anwendung systemtechnischer Methoden zur Analyse integrierter Energieversorgungs-Systeme(1974) Voß, AlfredDas exponentielle Wachstum des Energieverbrauchs hat heute aber einen Punkt erreicht, wo eine weitere Steigerung des Energiekonsums nicht ohne negative Auswirkunqen auf andere Bereiche bleibt. Umweltbelastung, Verknappung der Reserven, Versorgungssicherheit, Verfügbarkeit, Raumordnung und Energieeinsparung sind einige der SchIüsselbegriffe, die die sich ändernden Probleme der Energieversorgung umschreiben. Die Energieversorgung kann nicht länger als ein isoliertes technisch-ökonomisches Problem angesehen werden, sondern sie muß verstanden werden als ein in eine technisch-ökonomisch-ökologisch-gesellschaftliche Umgebung eingebettetes System, dessen Entwicklung wesentlich von seinen Wechselwirkungen mit dieser Umgebung bestimmt wird.Item Open Access An approach to integrated office document processing & management(1990) Mattos, Nelson Mendonca; Mitschang, Bernhard; Dengel, Andreas; Bleisinger, RainerWe propose an approach towards an integrated document processing and management system that has the intention to capture essentially freely structured documents, like those typically used in the office domain. The document analysis system ANASTASIL is capable to reveal the structure as well as the contents of complex paper documents. Moreover, it facilitates the handling of the containing information. Analyzed documents are stored in the management system KRISYS that is connected to several different subsequent services. The described system can be considered as an ideal extension of the human clerk, making his tasks in information processing easier. The symbolic representation of the analysis results allow an easy transformation in a given international standard, e.g., ODA/ODIF or SGML, and to interchange it via global network.